滚珠丝杠副非协调性接触特性研究

中国机械工程 ›› 2011, Vol. 22 ›› Issue (19): 2293-2297.

滚珠丝杠副非协调性接触特性研究

王福吉;阳江源;贾振元;王威;卢晓红

大连理工大学精密与特种加工教育部重点实验室,大连,116024

出版日期:2011-10-10 发布日期:2011-10-12
基金资助:
国家科技重大专项(2009ZX04011-033)；辽宁省教育厅科研项目(LT2010020)
National Science and Technology Major Project ( No. 2009ZX04011-033);
Liaoning Provincial Scientific Research Project of Ministry of Education of China（No. LT2010020）

Study on Non-conformal Contact Characteristics of Ball Screw

Wang Fuji;Yang Jiangyuan;Jia Zhenyuan;Wang Wei;Lu Xiaohong

Key Laboratory for Precision and Non-traditional Machining Technology of the Ministry of Education, Dalian University of Technology, Dalian,Liaoning,116024

Online:2011-10-10 Published:2011-10-12
Supported by:

National Science and Technology Major Project ( No. 2009ZX04011-033);
Liaoning Provincial Scientific Research Project of Ministry of Education of China（No. LT2010020）

摘要/Abstract

摘要：

滚珠丝杠副中滚珠与丝杠滚道和螺母滚道的接触是一种典型的非协调性接触,这种接触的特性对滚珠丝杠副的承载能力、传动效率和定位精度等都有着重要的影响。为此,采用Hertz接触理论建立了滚珠丝杠副轴向接触刚度的求解公式,然后从滚珠丝杠副轴向负载、设计参数和材料属性等方面分析了滚珠丝杠副的接触特性,最后运用有限元分析软件ANSYS对滚珠与丝杠滚道的接触进行仿真,仿真结果与理论结果非常相近,从而验证了理论分析的正确性。研究结果为高速、重载和精密滚珠丝杠副的设计与使用提供了理论指导。

关键词:

滚珠丝杠副, 非协调性接触, 轴向接触刚度, 有限元仿真

Abstract:

The contact between balls and screw races or nut races is a kind of typical non-conformal contact and its characteristics will influence greatly on ball screw’s load capacity, transmission efficiency and positioning accuracy. Thus Hertz contact theory was adopted to construct the solution formula of ball screw’s contact stiffness, then ball screw’s contact characteristics in terms of axial load, design parameters and material properties were analyzed, and the contact deformation values of the contact between balls and screw races were obtained through finite element simulation method. The simulation results are close to the theoretic ones, which proves the correctness of the theoretic analyses. The present study offers theoretical support for the design and application of high speed, heavy load and precision ball screws.

Key words:

ball screw; non-conformal contact, axial contact stiffness, finite element simulation

中图分类号:

TH132.1

王福吉, 阳江源, 贾振元, 王威, 卢晓红.

滚珠丝杠副非协调性接触特性研究

[J]. 中国机械工程, 2011, 22(19): 2293-2297.

WANG Fu-Ji, YANG Jiang-Yuan, GU Zhen-Yuan, WANG Wei, LEI Xiao-Gong.

Study on Non-conformal Contact Characteristics of Ball Screw

[J]. China Mechanical Engineering, 2011, 22(19): 2293-2297.

[1]	李凌丰, 刘彩芬. 滚珠丝杠副轴向变形分析 [J]. 中国机械工程, 2011, 22(7): 762-766.
[2]	蒋建东, 陶国兴, 赵颖娣, 张立彬, 胥芳. 邮资机摩擦分离机构的仿真分析与优化 [J]. 中国机械工程, 2011, 22(24): 2931-2936.
[3]	单小彪, 谢涛, 刘军考, 陈维山. 大型钢丝滚道球轴承的接触特性研究[J]. 中国机械工程, 2007, 18(20): 2429-2432.