不均匀温度场对改善三辊楔横轧轧件心部质量的研究

中国机械工程 ›› 2011, Vol. 22 ›› Issue (13): 1550-1554.

不均匀温度场对改善三辊楔横轧轧件心部质量的研究

仇平;王健;肖宏

燕山大学,秦皇岛,066004

出版日期:2011-07-10 发布日期:2011-07-14

Study on Rolled Pieces Internal Part Quality Improvement during Three-roll Cross Wedge Rolling by Non-uniform Temperature Field

Qiu Ping;Wang Jian;Xiao Hong

Yanshan University, Qinhuangdao,Hebei, 066004

Online:2011-07-10 Published:2011-07-14

摘要/Abstract

摘要：

楔横轧变形属于连续局部横压过程,中心压实法有助于提高圆轴类棒料横压时的内部质量。将中心压实法应用于三辊楔横轧,通过有限元模拟研究了不均匀温度场对三辊楔横轧轧件心部应力应变的影响。模拟结果表明,不均匀温度场方法可以减小轧件心部拉应力,增大心部静水压应力,提高心部塑性变形能力,有助于改善轧件心部质量。通过三辊楔横轧实验,验证了不均匀温度场方法改善轧件心部质量的可行性。

关键词:

三辊楔横轧, 中心压实法;不均匀温度场;心部疏松

Abstract:

Due to center-pressure method can improve internal quality of a round cross-section bar during stretching, through numerical simulation, the influences of stress and strain of internal part of rolled piece were discussed. It is proved that the method can reduce the internal part of rolled piece tensile stress, increase the hydrostatics stress, reinforce the deformation ability and make the quality of rolled pieces improved. And more, an experiment was carried out to verify the feasibility of non-uniform temperature field method to enhance the possibility of internal quality of rolled pieces.

Key words: three-roll cross wedge rolling, center-pressure method, non-uniform temperature field, center porous

中图分类号:

TG316.1

仇平, 王健, 肖宏.

不均匀温度场对改善三辊楔横轧轧件心部质量的研究

[J]. 中国机械工程, 2011, 22(13): 1550-1554.

CHOU Beng, WANG Jian, XIAO Hong.

Study on Rolled Pieces Internal Part Quality Improvement during Three-roll Cross Wedge Rolling by Non-uniform Temperature Field

[J]. China Mechanical Engineering, 2011, 22(13): 1550-1554.