[1]Wang Taiyong, Liu Qingjian,Wang Yunfeng, et al. Research on Reliability Design Theory and Methods of CNC System[C]//ASME 2009 International Mechanical Engineering Congress and Exposition. Lake Buena Vista, Florida:ASME,2009:247-253.
[2]王太勇,李宏伟.远程网络监控和二次开发功能的开放式结构数控系统:中国,01143486.4[P].2002.
[3]刘清建[1],王太勇[1],王涛[1],支劲章[1],刘振忠[1].嵌入式数控系统的结构可靠性分析[J].天津大学学报,2010,43(2):149-155.
[4]Dong Jingchuan, Yang Xingzhao, Liu Qingjian, et al. Design and Implementation of CNC Controllers Using Reeonfigurable Hardware [C]//2009 IEEE International Conference on Control and Automation. Christchurch, New Zealand : IEEE, 2009 : 1481- 1486.
[5]徐跃[1],王太勇[2],赵艳菊[2],董靖川[2].基于总线和网络技术的开放式可监控数控系统[J].农业机械学报,2008,39(10):178-182.
[6]杨健[1],张慧慧[1].基于嵌入式智能单元的网络维护系统研究[J].计算机集成制造系统,2006,12(8):1334-1339.
[7]董靖川[1],王太勇[1],徐跃[1].基于数控流水线技术的开放式数控系统[J].计算机集成制造系统,2009,15(6):1130-1139.
[8]唐鸿儒[1],陈虹[1],丁伟[2].网络环境下现场智能设备实时维护系统研究[J].测控技术,2002,21(2):45-49.
[9]Xu Chuangguang, Wang Xinyi, Xing Jishou, et al. Multi-sensor Intelligent System for On-line and Real-time Monitoring Tool Cutting State in FMS [J]. Journal of Beijing Institute of Technology, 1997, 6(3): 258-266.
[10]王太勇,李宏伟,薛国光.一种层次化监控和远程故障诊断功能的开放式数控系统:中国,01143487.2[P].2002-08-21.
[11]Xu X W, Newman S T. Making CNC Machine Tools More Open, Interoperable and Intelligent- a Review of the Technologies [J]. Computers in Industry,2006,57(2) :141-152.
[12]Ma Xiongbo, Han Zhenyu, Wang Yongzhang, et al. Development of a PC-based Open Architecture Software - CNC System [J].Chinese Journal of Aeronautics, 2007, 20:272-281.
[13]Li Bin, Zhou Yunfei, Tang Xiaoqi. A Research on Open CNC System Based on Architecture Component Software Reuse Technology[J]. Computers in Industry,2004,55: 73-85.
[14]傅志中[1],鲜海滢[1],陈友林[1].基于PCI总线的高速数据采集设备驱动开发[J].计算机应用,2009(2):577-579.
[15]He Gaiyun, Wang Taiyong, Qin Xuda,et al. Geo- metric Approximations Technique for Minimum Zone Sphericity Error[J]. Transactions of Tianjin University, 2005,11 (4) : 274-277.
[16]Wang T Y, Li H W. Research on Intelligent CNC Platform Based on Hierarchical and Distributed Architecture for Grinding Machine[J].Key Engineering Materials, 2004,259/260 : 258-259.
[17]He Gaiyun, Wang Taiyong, Zhao Jian, et al. Research on the Algorithm for Sphericity Error and the Number of Measured Points [J]. Chinese Journal of Mechanical Engineering, 2006,19(3) : 462-465.
[18]徐跃[1],王太勇[1],赵艳菊[1],董靖川[1],李波[1].基于ARM和DSP的可重构数控系统[J].吉林大学学报:工学版,2008,38(4):848-851.
[19]徐跃[1],王太勇[1],赵艳菊[1],董靖川[1],谭斌[2].基于现场总线的开放式网络化数控系统的设计[J].天津大学学报,2008,41(6):678-684.
[20]蒋永翔[1],王太勇[1],张莹[1],黄毅[1],刘路[1],胡淼[1].外圆切入磨再生颤振稳定性理论及评价方法[J].天津大学学报,2009,42(4):283-286.
[21]赵丽[1],王太勇[1],胡世广[1].基于网论的数控系统动态性能仿真[J].农业机械学报,2009(3):189-193.
[22]刘伟[1],王太勇[1].基于遗传算法的工艺路线生成及优化[J].农业机械学报,2009(8):203-208. |