基于多元信息的作业车间加工进度信息提取及分析模型研究

中国机械工程 ›› 2010, Vol. 21 ›› Issue (20): 2475-2481.

基于多元信息的作业车间加工进度信息提取及分析模型研究

王东强;鄢萍;任凡;刘飞

重庆大学机械传动国家重点实验室,重庆,400044

出版日期:2010-10-25 发布日期:2010-10-29

Research on Extraction and Analysis Models for Job Shop’s Production Progress Information Based on Multi-information

Wang Dongqiang;Yan Ping;Ren Fan;Liu Fei

State Key Laboratory of Mechanical Transmission,Chongqing University,Chongqing,400044

Online:2010-10-25 Published:2010-10-29

摘要/Abstract

摘要：

提出一种基于车间运行状态多元信息的生产进度信息分析模型,其基本思想是以两大信息主线为引导,建立各类进度目标的层次化关系,通过分析车间运行状态多元信息的相关性建立关联矩阵,并利用相关特征属性及指标权重进行评估,实现对作业车间复杂生产进度信息的分析处理。实际应用证明,该模型通过对复杂生产进度信息的精确提取与分析,较好地解决了车间进度与能力的平衡问题,实现了现代作业车间快速、高效、低成本的管理目标,提升了现代作业车间生产管理水平和企业竞争力。

关键词:

作业车间, 多元信息, 进度信息, 提取模型

Abstract:

Description and analysis of complex production progress information in job shop has been a difficult problem of the manufacturing execution system.

An analysis model for production progress information based on the multi-information of workshop operation state was proposed.After setting up the hierarchical relationship of various progress targets and establishing correlation matrix by analyzing the relevance of operation state’s multi-information,a model whose basic idea is guided by two information mainlines realized the analysis and processing of complicated production progress information through assessing with relevant feature attributes and index weights.

The results of practical applications show that, with accurate extraction and analysis of the complex production progress information, the balance problem of the workshop’s

progress and ability can be better solved,the management objective for a fast, efficient and low-cost modern job shop can be achieved, and the production management level and enterprise competitiveness of modern job shop can be improved.

Key words:

job shop, multi-information, progress information, extraction model

中图分类号:

TP202

王东强, 鄢萍, 任凡, 刘飞.

基于多元信息的作业车间加工进度信息提取及分析模型研究

[J]. 中国机械工程, 2010, 21(20): 2475-2481.

WANG Dong-Jiang, YAN Ping, LIN Fan, LIU Fei.

Research on Extraction and Analysis Models for Job Shop’s Production Progress Information Based on Multi-information

[J]. China Mechanical Engineering, 2010, 21(20): 2475-2481.

[1]	王国彪, 赖一楠, 范大鹏, 杨华勇, 王时龙. 新型精密传动机构设计与制造综述 [J]. J4, 201016, 21(16): 1891-1897.
[2]	王立存, 陈进, 张贤明, 陈国强. 基于泛函的制冷涡旋压缩机变壁厚涡旋型线理论及形状优化 [J]. J4, 201016, 21(16): 1898-1901.
[3]	李小力, 陈威, 闫蓉. 基于BP神经网络的空间轮廓误差自适应补偿 [J]. J4, 201016, 21(16): 1902-1906.
[4]	夏瑞雪, 卢荣胜, 刘宁, 董敬涛. 基于圆点阵列靶标的特征点坐标自动提取方法 [J]. J4, 201016, 21(16): 1906-1910.
[5]	陈立锋, 吴晓铃, 秦大同, 肖正明. 齿轮啮合过程摩擦功耗研究 [J]. J4, 201016, 21(16): 1911-1915.
[6]	李明磊, 贾育秦, 张学良, 刘丽琴, 杜娟, 温淑花, 兰国生. 基于多目标差异演化算法的并联机构结构优化 [J]. J4, 201016, 21(16): 1915-1920.
[7]	吴怀超, 吴白羽, 张秀华. 石蜡感温阀传热性能的数字仿真研究 [J]. J4, 201016, 21(16): 1921-1926.
[8]	鲁开讲, 师俊平, 张锋涛. 平面三自由度并联机构动力学优化设计 [J]. J4, 201016, 21(16): 1926-1931.
[9]	张敏杰, 王庆九, 管成. 并联式油液混合动力挖掘机动力系统仿真研究 [J]. J4, 201016, 21(16): 1932-1936.
[10]	刘安平, 刘济春. IPC-208B型原子力显微镜大范围扫描三维驱动系统研究 [J]. J4, 201016, 21(16): 1936-1940.
[11]	姚运萍, 王智渊. 螺栓连接受载能量损失与结合面参数识别 [J]. J4, 201016, 21(16): 1941-1943,1951.
[12]	陈建, 邓利娟. 恒力弹性机构的设计 [J]. J4, 201016, 21(16): 1944-1946.
[13]	罗洁思, 于德介, 史美丽. 基于SVD和线调频小波路径追踪的转速波动齿轮箱故障诊断 [J]. J4, 201016, 21(16): 1947-1951.
[14]	战晓磊, 辛洪兵, 汉斯·彼德　兰特斯. 基于虚拟现实的MOTOMAN-HP3型机器人运动学仿真 [J]. J4, 201016, 21(16): 1952-1954,1998.
[15]	苏厚军, 史铁林, 陈非. 高炉煤气透平机状态检修的设计与实施 [J]. J4, 201016, 21(16): 1955-1958.