基于可拓理论的绿色制造实施方案设计

中国机械工程 ›› 2010, Vol. 21 ›› Issue (1): 71-75.

基于可拓理论的绿色制造实施方案设计

李聪波1;王秋莲2;刘飞1;曹华军1

1.重庆大学机械传动国家重点实验室，重庆，400030

2.南昌大学，南昌，330030

出版日期:2010-01-10 发布日期:2010-01-22
基金资助:
国家自然科学基金资助项目(50605066)；国家科技支撑计划资助项目(2006BAF02A01)
National Natural Science Foundation of China（No. 50605066）;
The National Key Technology R&D Program（No. 2006BAF02A01）

Program Design for Green Manufacturing Implementation Based on Extension Theory

Li Congbo1;Wang Qiulian2;Liu Fei1;Cao Huajun1

1.State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing, 400030

2.Nanchang University,Nanchang,330030

Online:2010-01-10 Published:2010-01-22
Supported by:

National Natural Science Foundation of China（No. 50605066）;
The National Key Technology R&D Program（No. 2006BAF02A01）

摘要/Abstract

摘要：

针对目前企业实施绿色制造缺乏决策支持方法的问题，充分利用历史成功实施案例，面向知识表达与重用，提出了一种基于物元模型和可拓理论的绿色制造实施方案设计方法。分析了绿色制造实施方案的知识结构，提出了基于物元模型的实施方案知识表达方法;在此基础上，基于可拓理论提出了绿色制造实施方案设计流程，利用关联函数对历史相似实施方案进行基于距的实例检索，利用可拓变换和可拓逻辑推理将检索获得的实例修改为满足企业需求的实施方案。结合某机床制造企业的绿色制造实施方案设计实践验证了所提出方法的可行性和有效性。

关键词:

绿色制造, 实施方案, 物元模型, 可拓理论

Abstract:

In order to support enterprises to implement green manufacturing(GM), a GM implementation program design method based on matter-element model and extension theory was proposed, which was oriented to knowledge expression and reuse. The knowledge system of GM program was analyzed, and the GM program knowledge was expressed by matter-element model. Then the GM program design process was presented based on extension theory, in which the most similar GM program was searched in the existing successful cases by the distance method, and the final GM program could be obtained by revising the selected program through extension transformation and logical reasoning. At last, this method was applied to design the GM implementation program in a machine tool works to demonstrate its feasibility and validity. 

Key words: green manufacturing(GM), implementation program, matter-element model, extension theory

中图分类号:

TH186

李聪波, 王秋莲, 刘飞, 曹华军.

基于可拓理论的绿色制造实施方案设计

[J]. 中国机械工程, 2010, 21(1): 71-75.

LI Cong-Bei, WANG Qiu-Lian, LIU Fei, CAO Hua-Jun.

Program Design for Green Manufacturing Implementation Based on Extension Theory

[J]. China Mechanical Engineering, 2010, 21(1): 71-75.

参考文献

[1]刘飞曹华军张华.绿色制造的理论与技术[M].北京:科学出版社,2005.15-16. 9
[2]Gutowski T, Murphy C, Allen D, et al. WTEC Panel Report on: Environmentally Benign Manufacturing (EBM) [R]. Baltimore: International Technology Research Institute of Loyola College in Maryland, 2000.
[3]Co--op America. National Green Pages[EB/OL]. [2008-09 30]. http ://cleanerproduction. com/.
[4]王能民[1],孙林岩[1],杨彤[1].绿色制造战略的障碍性因素分析[J].中国机械工程,2005,16(8):693-696.
[5]Rene K, Massimiliano V. The Diffusion of Clean Technologies: a Review with Suggestions for Future Diffusion Analysis[J] . Journal of Cleaner Production, 2008,16 ( S1 ) : 14-21.
[6]Hooper P D, Jenkins T. International Cleaner Technology Databases: on Line, off Target[J]. Jouranal of Cleaner Production, 1995, 3(1/2):33-40.
[7]杨春燕,蔡文著.可拓工程[M],2007:347.
[8]龚京忠[1],邱静[1],李国喜[1],李婷婷[1].基于可拓理论的产品配置设计[J].计算机集成制造系统,2007,13(9):1700-1709. 2
[9]王体春[1],钟诗胜[1].基于知识重用的大型水轮机可拓方案设计[J].计算机辅助设计与图形学学报,2008,20(2):239-245.
[10]Wang Qiulian,Liu Fei, Li Congho, et al. Study on Processoriented Envirronmental Performance Measurement System of Green Manufacturing [C]//2008 Proceedings of Information Technology and Environmental System Sciences. Jiaozuo, Henan, China, 2008:654-658.
[11]张曙.下一代生产系统[J].世界制造技术与装备市场,2008(2):52-55.
[12]重庆机床集团有限公司.产品中心[EB/OL].[2008-09-30].http://www.cqmtw.com.
[13]Sime C. Environmentally Responsible Manufacturing:the Development and Validation of a Measurement Model[J]. European Journal of Operational Research, 2003,146 ( 1 ) : 130-155.