不锈钢焊条工艺稳定性分析与评价

中国机械工程 ›› 2008, Vol. 19 ›› Issue (2): 245-248.

不锈钢焊条工艺稳定性分析与评价

王勇¹ 王宝²

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2008-01-25 发布日期:2008-01-25

Analysis and Evaluation for Usability-Stability of the Stainless Steel Covered Electrode

Wang Yong¹ Wang Bao²

Received:1900-01-01 Revised:1900-01-01 Online:2008-01-25 Published:2008-01-25

摘要/Abstract

摘要：

焊条渣壁过渡形态的倾向大小是衡量不锈钢焊条工艺稳定性的主要标志。利用汉诺威弧焊分析仪对不锈钢焊条的焊接电参数进行测试分析，提取短路电压概率密度和、平均电弧电压、平均焊接电流和短路频率等与不锈钢焊条渣壁过渡倾向大小有关的4个特征信息，然后采用主成分分析法确定不锈钢焊条工艺稳定性评价指数。研究结果为定量判断不锈钢焊条熔滴过渡形态和科学评价不锈钢焊条工艺稳定性提供了新方法。

关键词: 不锈钢焊条, 焊条工艺稳定性, 熔滴过渡, 焊接电弧物理, 主成分分析

Abstract: Tendency of the flux-wall guided transfer is the main symbol to judge usability-stability of the stainless steel covered electrode. Using the Analysator Hannover, welding electric parameters of the stainless steel covered electrode were measured and analyzed. Four characteristic information values correlated with tendency of the flux-wall guided transfer were extracted, such as the sum of probability density of short-circuiting voltage, mean value of arc voltage, mean value of welding current and frequency of short circuit, and then method of principal component analysis was applied to determine the evaluation index of usability-stability of the stainless steel covered electrode. It offers a new method for quantitatively judging metal transfer modes and scientifically evaluating usability-stability of the stainless steel covered electrode.

Key words: stainless steel covered electrode, usability-stability of the covered electrode, metal transfer; welding arc physics, principal component analysis

中图分类号:

TG422.3

王勇, 王宝. 不锈钢焊条工艺稳定性分析与评价[J]. 中国机械工程, 2008, 19(2): 245-248.

Wang Yong Wang Bao.

Analysis and Evaluation for Usability-Stability of the Stainless Steel Covered Electrode [J]. China Mechanical Engineering, 2008, 19(2): 245-248.

[1]	吕小青, 宋海凤. 弧焊熔滴过渡混沌的若干问题探讨 [J]. 中国机械工程, 2011, 22(19): 2365-2369.
[2]	宋绍朋, 栗卓新, 李国栋. 自保护药芯焊丝韧化机理及电弧特性的研究进展 [J]. 中国机械工程, 2010, 21(14): 1752-1757.
[3]	吴开源, 黄石生, 李星林, 柯利涛. 脉冲MAG焊后中值脉冲工艺研究[J]. 中国机械工程, 2007, 18(20): 2468-2471.