超精密蜗轮副加工成套工艺研究

doi:10.3969/j.issn.1004-132X.2022.09.005

中国机械工程 ›› 2022, Vol. 33 ›› Issue (09): 1051-1056.DOI: 10.3969/j.issn.1004-132X.2022.09.005

超精密蜗轮副加工成套工艺研究

彭东林¹, 石照耀², 郑永¹, 周启武¹, 杨继森³, 徐是³

1. 重庆理工大学机械检测技术与装备教育部工程研究中心, 重庆, 400054;
2. 北京工业大学北京市精密测控技术与仪器工程技术研究中心, 北京, 100124;
3. 重庆理工大学时栅传感及先进检测技术重庆市重点实验室, 重庆, 400054

收稿日期:2021-09-27 出版日期:2022-05-10 发布日期:2022-05-17
通讯作者: 郑永(通信作者),男,1983年生,副研究员。研究方向为机床传动误差检测理论与仪器。E-mail:sdzzzy@163.com。
作者简介:彭东林,男,1952年生,教授、博士研究生导师。研究方向为精密测试技术及仪器、智能传感器。
基金资助:
国家重大科研仪器研制项目(51827805);重庆市技术创新与应用发展专项重点项目(cstc2019jscx-mbdx0187);重庆市教委科学技术研究项目(KJQN202001150);巴南区科技成果转化及产业化专项(2020TJZ023)

Research on Complete Set Technology of Ultra-precision Worm Gear Pair

PENG Donglin¹, SHI Zhaoyao², ZHENG Yong¹, ZHOU Qiwu¹, YANG Jisen³, XU shi³

1. Engineering Research Center of Mechanical Testing Technology and Equipment, Ministry of Education, Chongqing University of Technology, Chongqing, 400054;
2. Beijing Engineering Research Center of Precision Measurement Technology and Instruments, Beijing University of Technology, Beijing, 100124;
3. Chongqing Key Laboratory of Time-Grating Sensing and Advanced Testing Technology, Chongqing University of Technology, Chongqing, 400054

Received:2021-09-27 Online:2022-05-10 Published:2022-05-17

摘要/Abstract

摘要： 介绍了一种新型超精密蜗轮副加工成套工艺，该工艺以“误差诱导重塑与自我精准抵消”为核心思想。为实现传动误差的精准检测，开发了机械传动误差检测智能iFMT仪器；研发了嵌入iFMT仪器可实现加工测量一体化功能的新型蜗轮母机；配合刀具、新标准等配套技术，加工得到双面同时达到DIN标准1级精度的超精密蜗轮副。

关键词: 传动误差, 超精密蜗轮副, 加工测量一体化, 蜗轮母机

Abstract: A new set technology of precision worm gear pair was introduced herein. With the core idea of “error induced remodeling and self accurate offset”, an intelligent iFMT instrument for mechanical transmission error detection was developed to realize the accurate detection of transmission errors. In order to realize the technology, a new worm gear mother machine embedded with iFMT instrument was developed, which may realize the integrated function of machining and measurement. Combined with cutting tools, new standards and supporting technologies, an ultra-precision worm gear pair with double side accuracies of DIN standard grade 1 was obtained finally.

Key words: transmission error, ultra-precision worm gear pair, integrated machining and measurement, worm gear mother machine

中图分类号:

TG156

彭东林, 石照耀, 郑永, 周启武, 杨继森, 徐是. 超精密蜗轮副加工成套工艺研究[J]. 中国机械工程, 2022, 33(09): 1051-1056.

PENG Donglin, SHI Zhaoyao, ZHENG Yong, ZHOU Qiwu, YANG Jisen, XU shi. Research on Complete Set Technology of Ultra-precision Worm Gear Pair[J]. China Mechanical Engineering, 2022, 33(09): 1051-1056.

参考文献

[1] 和子康.机床传动精度测量和提高[M].北京:中国计量出版社, 1987. HE Zikang. Measurement and Improvement of Transmission Accuracy of Machine Tools[M]. Beijing:China Metrology Press, 1987.
[2] 彭东林,周启武,郑永,等.用于超精密蜗轮副加工的误差诱导重塑与精准抵消新工艺[J].中国机械工程, 2021, 32(19):2326-2330. PENG Donglin, ZHOU Qiwu, ZHENG Yong, et al. New Technology of Error Induced Remodeling and Precision Cancellation for Ultra-precision Worm Gear Pair Machining[J]. China Mechanical Engineering, 2021, 32(19):2326-2330.
[3] 彭东林,谭为民,刘小康,等.机床传动误差测量中的空域法分析[J].农业机械学报, 2003,34(5):123-125. PENG Donglin, TAN Weimin, LIU Xiaokang, et al. Analysis of Transmission Error Measurement of Machine Tool by the Method of Spatial Domain[J]. Transactions of the Chinese Society for Agricultural Machinery, 2003,34(5):123-125.
[4] 彭东林,李彦,付敏,等.用于极端和特殊条件下机械传动误差检测的寄生式时栅研究[J].仪器仪表学报, 2013, 34(2):359-365. PENG Donglin, LI Yan, FU Min, et al. Study on Parasitic Time Grating Sensors Used for Mechanical Transmission Error Measurement under Harsh and Special Environment[J]. Chinese Journal of Scientific Instrument, 2013, 34(2):359-365.
[5] 郑永.基于时栅传感器的精密蜗轮副动态检测技术研究[D].合肥:合肥工业大学, 2011. ZHENG Yong. Dynamie Testing Technology for Precision Worm Gears Based on Time Grating Sensor[D]. Hefei:Hefei University of Technology, 2011.
[6] 彭凯,于治成,刘小康,等.单排差动结构的新型纳米时栅位移传感器[J].仪器仪表学报, 2017, 38(3):734-740. PENG Kai, YU Zhicheng, LIU Xiaokang, et al. Novel Nanometer Time-grating Displacement Sensor with Single Row Differential Structure[J]. Chinese Journal of Scientific Instrument, 2017, 38(3):734-740.
[7] TANG Qifu, PENG Donglin, WU Liang, et al. An Inductive Angular Displacement Sensor Based on Planar Coil and Contrate Rotor[J].IEEE Sensors Journal, 2015, 15(7):3947-3954.
[8] PU Hongji, LIU Hongzhong, LIU Xiaokang, et al. A Novel Capacitive Absolute Positioning Sensor Based on Time Grating with Nanometer Resolution[J]. Mechanical Systems and Signal Processing, 2017, 104:705-715.
[9] 彭东林,郑永,周启武,等.基于加工测量一体化工艺的新型蜗轮副母机研制[J].机械工程学报, 2021,57(6):20-25 PENG Donglin, ZHENG Yong, ZHOU Qiwu, et al. Development of New Type of Worm Gear Pair Mother Machine Based on the Integrated Process of Machining and Measurement[J].Journal of Mechanical Engineering, 2021, 57(6):20-25.

[1]	魏冰阳, 李家琦, 王文胜, . 基于差齿面拓扑的轮齿承载拟赫兹接触分析[J]. 中国机械工程, 2021, 32(18): 2174-2180.
[2]	张波;魏冰阳;刘大可. 基于等切共轭的弧齿锥齿轮差曲面建立与解析[J]. 中国机械工程, 2020, 31(04): 459-464.
[3]	白亚莉1;张毅1;冀敏2;刘文强3. 基于多分布响应面算法的火炮方向机齿轮传动误差可靠性分析[J]. 中国机械工程, 2017, 28(13): 1593-1600.
[4]	雷贤卿, 孟琦, 马文锁, 杨科林. 闭环齿轮传动系统传动误差研究[J]. 中国机械工程, 2017, 28(06): 675-682.
[5]	雷贤卿, 蔡振华, 张明柱, 马文锁. 液压机械无级变速器机械变速机构的传动误差分析[J]. 中国机械工程, 2015, 26(23): 3253-3259.
[6]	雷敦财, 唐进元. 一种面齿轮传动时变啮合刚度数值计算方法[J]. 中国机械工程, 2014, 25(17): 2300-2304.
[7]	张靖1, 陈兵奎1, 吴长鸿2, 李朝阳1, 3. 圆锥滚子轴承预紧力对变速器啸叫噪声的影响分析[J]. 中国机械工程, 2013, 24(11): 1453-1458.
[8]	彭东林1, 2, 郑永1, 陈自然1, 高忠华2, 郑方燕2. 基于时栅传感器的传动误差动态测试系统研制 [J]. 中国机械工程, 2011, 22(10): 1138-1142.
[9]	郑永, 彭东林, 王先全, 杨继森, 陈自然. 新型蜗轮副综合参数检查仪研制及精度检定 [J]. 中国机械工程, 2010, 21(24): 2989-2994.
[10]	徐恺, 邓效忠, 刘更, 杨建军, 苏建新. 含有直廓内齿轮行星轮系的传动误差计算与噪声试验 [J]. 中国机械工程, 2010, 21(1): 76-79.
[11]	王成;方宗德;贾海涛;吉强;. 修形人字齿轮传动误差计算与试验研究[J]. J4, 2009, 20(20): 0-2398.
[12]	华林;黄海浪;韩星会;冯玮;. 渐开线直齿圆锥齿轮齿廓圆弧修形方法研究 [J]. J4, 2009, 20(07): 0-881.
[13]	邓效忠, 杨建军, 魏冰阳, 方宗德. 超声激励下弧齿锥齿轮研齿系统动态研磨力分析[J]. 中国机械工程, 2007, 18(19): 2359-2361.

超精密蜗轮副加工成套工艺研究

Research on Complete Set Technology of Ultra-precision Worm Gear Pair

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 13

编辑推荐

Metrics