Characteristics of Mechanical Alloying Modified FeS/Cu Alloy Powders

Abstract

Abstract: In order to solve the problems that the FeS/Cu-based powder metallurgy materials were agglomerated and the interfaces were poor after sintering,FeS/Cu-based materials were prepared by mechanical alloying technique.The mixing characteristics, pressing properties and mechanical properties after sintering of 6% mass fraction FeS/Cu alloy powders with different ball milling time were tested and analyzed by means of scanning electron microscopy, X-ray diffraction, metallographic microscope and so on.The results show that mechanical alloying may effectively improve the mixing of FeS particles and matrix alloy powder uniformity. After sintering the material density and hardness are improved,and the interface bonding of FeS and Cu possesses good quality. As the FeS particles were uniformly dispersed in the copper alloy matrix, the continuity of the matrix materials was separated, making the toughness and crushing strength of the composites reduce.

Key words: mechanical alloying, ferrous sulfide, copper, powder

摘要： 为了解决FeS/Cu粉末冶金复合材料中FeS易团聚以及界面结合差的问题，采用机械合金化技术制备了FeS/Cu复合材料粉末。利用扫描电镜、X射线衍射仪、金相显微镜等对不同球磨时间的质量分数为6%的FeS/Cu合金粉末的混合特性、压制特性及烧结后的力学性能进行检测和分析，结果表明：机械合金化可有效改善FeS颗粒与基体合金粉末的混合均匀性，烧结后材料的密度、硬度均得到提高，FeS和Cu界面结合良好；由于FeS颗粒均匀弥散地分布在铜合金基体中，割裂了基体材料的连续性，反而使复合材料的韧性和压溃强度有所降低。

关键词: 机械合金化, 硫化亚铁, 铜, 粉末

CLC Number:

TF123.1

YIN Yanguo;ZENG Qingqin;ZHANG Guotao;LIU Jianfeng. Characteristics of Mechanical Alloying Modified FeS/Cu Alloy Powders[J]. China Mechanical Engineering.

尹延国;曾庆勤;张国涛;刘剑峰. 机械合金化改性硫化亚铁/铜合金粉末的特性[J]. 中国机械工程.

References

[1]焦祥楠. 无铅铜铋滑动轴承材料力学性能及摩擦磨损特性研究[D].合肥:合肥工业大学,2012.
JIAO Xiangnan.Study on the Mechanics of Lead-free Copper-Bismuth Sliding Bearing Materials and Friction and Wear Characteristics[D]. Hefei：Hefei University of Technology,2012.
[2]赵林. 含WS2铜-钢双金属无铅固体自润滑材料的制备及其摩擦学性能研究[D].长沙：中南大学,2013.
ZHAO Lin.Research on Preparation and Tribological Properties of WS2 contained Copper-Steel Bimetal Lead-free Solid Self-lubricating Materials[D].Changsha:Central South University,2013.
[3]SATO T, HIRAI Y, FUKUI T, et al. Tribological Properties of Porous Cu Based Alloy Containing Nano Sized Sulfide Particles[J]. Journal of Advanced Mechanical Design Systems & Manufacturing, 2012, 6(1):158-167.
[4]SATO T, HIRAI Y, MARUYAMA T, et al. Sintering and Tribological Properties of Lead-free Bronze Alloy for Friction Materials[J]. Powder Metallurgy, 2011, 54(1):10-12.
[5]尹延国,李吉宁,张国涛等. FeS/铜基复合材料的摩擦学性能[J]. 材料热处理学报,2017,38(2):1-8.
YIN Yanguo, LI Jining, ZHANG Guotao, et al. Tribological Properties of FeS/Copper Matrix Composite[J]. Transactions of Materials and Heat Treatment，2017,38(2):1-8.
[6]王德宝. 高性能耐磨铜基复合材料的制备与性能研究[D].合肥:合肥工业大学,2008.
WANG Debao. Research on the Preparation and Performance of Advanced Wear-resistant Copper Matrix Composites [D].Hefei：Hefei University of Technology,2008.
[7]金永平,郭斌,王尔德. 高能球磨对3%C-Cu粉末压制特性的影响[J]. 中国有色金属学报,2007,17(9):1490-1494.
JIN Yongping, GUO Bin, WANG Erde. Effect of High-energy Mechanical Milling on Cold Compactability of 3%C-Cu Powder[J]. Transactions of Nonferrous Metals Society of China, 2007,17(9):1490-1494.
[8]付国新. 机械球磨TiAl复合粉末及制坯工艺的研究[D].哈尔滨:哈尔滨工业大学,2006.
FU Guoxin. Study on Mechanical Milling and Pressing Billets of Ti/Al Composite Powders[D].Harbin：Harbin Institute of Technology,2006.
[9]张昌明,许林青,张会, 等.热处理对TC11 / LF6异种金属摩擦焊质量的影响[J].中国机械工程，2016，27（17）：2391-2395.
ZHANG Changming, XU Linqing, Zhang Hui, et al. Effects of Heat Treatmant on Formation and Mechanical Properties Quality of TC11 and LF6 Dissimilar Metal Friction Welding Seam[J].China Mechanical Engineering，2016，27（17）：2391-2395.

[1]	GAO Chuanbao, ZHANG Xinyue, CEN Jiajia, CHEN Qin, FENG Haiyan, CHEN Kai, ZHANG Dekun. Tribological Properties of Polyelectrolyte-Modified PEEK Composite Materials [J]. China Mechanical Engineering, 2026, 37(1): 14-21.
[2]	JIANG Feng1, 2, HU Ronghui1, DENG Jiedong1, ZHANG Tian1, HUANG Guoqin1, 2, XU Yangli1, 2, LI Yousheng3, LIU Chao4. Development Trends and Prospects of Additive Manufacturing Technology for Cemented Carbide Cutting Tools [J]. China Mechanical Engineering, 2025, 36(06): 1300-1313.
[3]	XU Zuolin, HUANG Chuanzhen, LIU Huanlian, LIU Dun. Coating Technology and Mechanism of Modified Diamond Powder by Surface Coating of WC Powders [J]. China Mechanical Engineering, 2024, 35(02): 208-214.
[4]	JIA Zhixin, ZHANG Kaiyue, WANG Jin. Study on EDM of PCD by Mixing Iron Powders [J]. China Mechanical Engineering, 2023, 34(22): 2684-2692.
[5]	XU Mingsan, ZHOU Chunhui, ZHANG Zheng, ZENG Shoujin, . Temperature Distribution of Powder-gas-optical Coupling temperature field in Laser Cladding Processes [J]. China Mechanical Engineering, 2022, 33(01): 70-77.
[6]	LIN Qiyin, ZHANG Yuhan, HONG Jun, WANG Chen, ZHANG Ningjing, . Influences of Grain Sizes on Contact Mechanics Properties of Polycrystalline Coppers [J]. China Mechanical Engineering, 2021, 32(19): 2312-2320.
[7]	GUO Chenguang, LYU Ning, GUO Hao, LI Qiang, YUE Haitao, . Analysis of Influence Laws of Blank Substrate Morphology on Powder Flow Field of Remanufacturing Coaxial Powder Feeding#br# [J]. China Mechanical Engineering, 2021, 32(09): 1091-1101.
[8]	XU Anyang, WANG Xiaoming, ZHU Sheng, HAN Guofeng, ZHAO Yang, GUO Yingchun. Transition Mechanism and Law of Electrode Materials of ESD [J]. China Mechanical Engineering, 2021, 32(08): 960-966.
[9]	ZHENG Lihao1,2;ZHANG Chaoqun1,2;ZHANG Qingxin1,2;ZHANG Guotao1,2;LI Yongbing1,2. Research on Te-Cr-Cu Electrode Life for Aluminum Alloy RSW [J]. China Mechanical Engineering, 2020, 31(21): 2632-2637.
[10]	LI Rongrong;YIN Yanguo;ZHANG Kaiyuan;ZENG Qingqin;CHEN Qi. Friction and Wear Properties of FeS/Cu Composite Materials Fabricated by Mechanical Alloying [J]. China Mechanical Engineering, 2020, 31(17): 2024-2030.
[11]	WU Haihua, ZHANG Cheng, LI Yafeng, LIU Li, XU Lijie. Experimental Study of SLS Processes for Artificial Graphite Powders [J]. China Mechanical Engineering, 2020, 31(15): 1838-1845.
[12]	ZHANG Jiangtao, TAN Yuanqiang, BAO Tao, XU Yangli, JIANG Shengqiang. Discrete Element Simulation for Effects of Roller's Vibrations on Powder Spreading Quality [J]. China Mechanical Engineering, 2020, 31(14): 1717-1723.
[13]	XU Anyang, WANG Xiaoming, ZHAO Yang, ZHU Sheng, HAN Guofeng. Experiments on ESD-Heating Remelting, Rolling Dressing [J]. China Mechanical Engineering, 2020, 31(14): 1741-1746.
[14]	WANG Quanlong1;ZHANG Chaofeng1;WU Meiping1，2;CHEN Jiaxuan3. Subsurface Damage Mechanism of Nano Polycrystalline Coppers in Single Point Diamond Turning [J]. China Mechanical Engineering, 2019, 30(23): 2790-2797,2808.
[15]	WU Maochao；YU Aibing；WEI Jinlong；CHEN Qiujie；SUN Lei；YUAN Jiandong. Influences of Cladding Materials on Cracks and Hardnesses of Laser Cladding Chip Breakers on High Speed Steel Cutting Tools [J]. China Mechanical Engineering, 2019, 30(13): 1607-1612,1620.