Flexible Multi-body Dynamics Analysis on Cage of Angular Contact Ball Bearings

Abstract

Abstract:

Considering the structural deformation of inner, outer and cage and dynamic contact relationship among the ball, raceways and cage, a flexible multi-body contact dynamics model of angular contact ball bearings was established by FEM(finite element method). The dynamic contact simulation analysis was achieved by ANSYS/LS-DYNA and the calculated dynamics characteristics were discussed with different radial loads, rotating speeds, guide clearances. The calculated results of angular contact ball bearings were verified by theoretical values such as dynamic contact stress, angular speed of cage, dynamic impact stress and trace of cage's center. The dynamic impact stress and stability of cage are affected especially by the variety of angular speed.

Key words: angular contact ball bearing, cage, finite element method, dynamics analysis

摘要：

考虑套圈、钢球和保持架的结构弹性变形与动态接触关系，建立了角接触球轴承柔性多体接触动力学有限元仿真模型。在不同引导游隙、转速和径向力下，运用ANSYS/LS-DYNA仿真分析了角接触球轴承的动力学性能，以及保持架的动态冲击应力和稳定性。计算讨论了角接触球轴承的动态接触应力，获得了保持架的角速度、动态冲击应力、质心运动轨迹等仿真结果，它们与理论计算结果具有较好的一致性。结果表明，球轴承运动速度的变化对保持架的动态冲击应力和稳定性的影响较大。

关键词: 角接触球轴承, 保持架, 有限元法, 动力学分析

CLC Number:

Yao Tingqiang, Xie Wei, Tan Yang. Flexible Multi-body Dynamics Analysis on Cage of Angular Contact Ball Bearings[J]. China Mechanical Engineering, 2014, 25(1): 117-122.

姚廷强, 谢伟, 谭阳. 角接触球轴承保持架柔性多体动力学分析[J]. 中国机械工程, 2014, 25(1): 117-122.

References

[1]Wensing J A. On the Dynamics of Ball Bearings[D]. Enschede：University of Twente，1998.
[2]Rubio H，Garcia-Prada J C，Castejon C,et al. Dynamic Analysis of Rolling Bearing System Using Lagrangian Model vs. FEM Code[C]//12th IFToMM World Congress. Besancon，France，2007：18-21.
[3]Harris T A. Rolling Bearing Analysis[M]. 4th Ed. New York:John Wiley & Sons,2000.
[4]穆立祥.滚动接触之刚度探讨[D]. 桃园：中原大学，2001.
[5]唐云冰. 航空发动机高速滚动轴承力学特性研究[D]. 南京：南京航空航天大学，2006.
[6]张乐乐，谭南林，攀莉. 滚动轴承故障的显式动力学仿真与分析[J].上海交通大学学报，2007，41(9)：1506-1509.
Zhang Lele，Tan Nanlin，Fan Li. The Dynamics Simulation and Failure Analysis of Rolling Bearings[J]. Journal of Shanghai Jiao Tong University，2007，41(9)：1506-1509.
[7]张乐乐，高祥，谭南林，等.基于ANSYS/LS-DYNA的滚动轴承仿真与分析[J]. 机械设计，2007，24(9)：62-65.
Zhang Lele，Gao Xiang，Tan Nanlin，et al. Simulation and Analysis on Rolling Bearings Based on ANSYS/LS-DYNA[J]. Journal of Machine Desgin，2007，24(9)：62-65.
[8]林腾蛟，荣崎，李润方，等. 深沟球轴承运转过程动态特性有限元分析[J]. 振动与冲击，2008，28(1)：118-122.
Lin Tengjiao，Rong Qi，Li Runfang，et al. Finite Element Analysis for Dynamic Characteristic of a Deep-groove Ball Bearing in Motion Process[J]. Journal of Vibration and Shock，2008，28(1)： 118-122.
[9]高春良. 滚动轴承故障的显示动力学仿真分析与振动特征分析[D]. 成都：电子科技大学，2010.
[10]邓四二，谢鹏飞，杨海生，等. 高速角接触球轴承保持架柔体动力学分析[J]. 兵工学报，2011，32(5)：625-631.
Deng Sier，Xie Pengfei，Yang Haisheng，et al. Flexible-body Dynamics Analysis on Cage of High-speed Angular Contact Ball Bearing[J]. Acta Armamentarii，2011，32(5)：225-231.
[11]李晌，蒋新力，姜艳红，等. 高速圆柱滚子轴承柔性保持架的动力学分析[J]. 轴承，2010(7)：1-5.
Li Shang，Jiang Xinli，Jiang Yanhong，et al. Dynamic Analysis on Flexible Cage in High Speed Cylindrical Roller Bearing[J]. Bearing， 2010(7)：1-5.
[12]姚廷强，迟毅林，王立华，等. 球轴承柔性多体动力学分析与接触振动研究[J]. 振动与冲击，2009，28(10)：158-162.
Yao Tingqiang，Chi Yilin，Wang Lihua，et al. Contact Vibration and Dynamics Analysis on Flexible Multibdoy Ball Bearing[J]. Journal of Vibration and Shock，2009，28(10)：158-162.
[13]姚廷强，谭阳，王里达. 角接触球轴承柔性多体动力学分析[J]. 中国机械工程，2011，22(9)：1054-1060.
Yao Tingqiang，Tan Yang，Wang Lida. Flexible Multibdoy Contact Dynamics Analysis on Angular Contact Ball Bearing[J]. China Mechanical Engineering，2011，22(9)：1054-1060.

[1]	LUO Min, HUANG Congjian, LI Qiaozheng, XU Tingting, FU Yanbo. Investigation of Factors Influencing Expandable Tubes Milling Based on SPH-FEM Coupling Algorithms [J]. China Mechanical Engineering, 2025, 36(12): 2927-2935.
[2]	Shaogan YE, Tianxing CHEN, Ding CHEN, Kefei MIAO, Shoujun ZHAO, Huixiang LIU. Tooth Surface Modification and Anti-wear Design of Spline between Cylinder and Shaft of Piston Pumps [J]. China Mechanical Engineering, 2025, 36(08): 1767-1773.
[3]	JIN Minglei1, 2, JIN Mingsheng1, 2, SONG Zhengjiang3, ZENG Xi1, 2, LI Yan1, 2, TANG Xuan1, 2. Material Removal Model of Center-inlet Elastic Polishing Tools [J]. China Mechanical Engineering, 2024, 35(09): 1659-1666.
[4]	TIAN Tao1, 3, LI Wenhui2, 3, 4, WEN Xuejie1, 3, LI Xiuhong1, 3, YANG Shengqiang1, 3. DEM-FEM Coupled Simulation and Experimental Study of Residual Stresses in Horizontal Vibratory Finishing Processes [J]. China Mechanical Engineering, 2024, 35(09): 1667-1676.
[5]	WANG Hao1, 2, WANG Jiangbei3, LUO Haodong3, WANG Liwen4. An Adaptive Design Domain Topology Optimization Method Based on Improved Quadtree and SBFEM [J]. China Mechanical Engineering, 2024, 35(05): 904-915,927.
[6]	GUO Wei, CAO Hongrui, ZI Yanyang, WEI Xunkai. Study on Contact Fatigue Crack Modeling and Propagation Law of Rolling Bearings [J]. China Mechanical Engineering, 2023, 34(16): 1891-1899.
[7]	LI Zhenjun, ZHAO Chunyu. Thermal Mechanics Coupling Analysis of Angular Contact Ball Bearings Installed in Pairs in Feed System [J]. China Mechanical Engineering, 2023, 34(07): 821-829.
[8]	HE Yufan, SUN Jianghong, GAO Feng, LI Naizheng, HE Xueping, WANG Junjian. Design,Analysis and Optimization of a Cone External Surface Mounting Manipulator [J]. China Mechanical Engineering, 2023, 34(01): 55-64.
[9]	WEN Guilin, CHEN Gaoxi, WANG Hongxin, XUE Liang, WEI Peng, LIU Jie, . Time Domain Dynamics Topology Optimization of Functionally Gradient Material Structures with Self-weight Load [J]. China Mechanical Engineering, 2022, 33(23): 2774-2782.
[10]	MENG Zong, LI Jiasong, PAN Zuozhou, PANG Xiushen, CUI Lingli, FAN Fengjie. Influences of Crack Faults on TVMS of Gear Teeth [J]. China Mechanical Engineering, 2022, 33(16): 1897-1905，1911.
[11]	WANG Longkai, WANG Ailun, YIN Yijun, JIN Miao, HENG Xing. Dynamics Modeling Method of Complex Rotors for Aero-turboshaft Engines [J]. China Mechanical Engineering, 2022, 33(13): 1513-1520.
[12]	YANG Jingjing, LI Cheng, TIE Ying. Low-velocity-impact Resistance Property of Sandwich Plates with Aluminum Folded Core [J]. China Mechanical Engineering, 2022, 33(13): 1629-1637.
[13]	CONG Ming, BI Cong, WANG Minghao, LIU Dong, DU Yu. Design of Soft Robots for Hand Function Rehabilitation Training [J]. China Mechanical Engineering, 2022, 33(08): 883-889.
[14]	ZHAO Huipeng, ZHOU Junjie, LI Jin, FAN Shurui, QIAN Changxian. Research on Basic Working Characteristics of a New Type Mechanical Continuously Transmission with Planetary Centrifugal Structure [J]. China Mechanical Engineering, 2021, 32(20): 2427-2435.
[15]	WANG Baomin, BAI Chen, NAN Yang, WU Yan. Influences of Nozzle Structure on Air Curtain Effect in Oil-air Lubrication of Angular Contact Ball Bearings [J]. China Mechanical Engineering, 2021, 32(18): 2197-2202.