Research on Novel Driving Device and Metamorphic Characteristics for Parallel(Hybrid) Mechanism with Sliding-linear-drivers

China Mechanical Engineering ›› 2011, Vol. 22 ›› Issue (21): 2540-2545.

Previous Articles Next Articles

Research on Novel Driving Device and Metamorphic Characteristics for Parallel(Hybrid) Mechanism with Sliding-linear-drivers

Shen Huiping1;Zhao Haibin1;Deng Jiaming1;Xu Linsen2;Yang Tingli1

1.Changzhou University,Changzhou,Jiangsu,213016

2.Institute of Advanced Manufacturing Technology,Changzhou,Jiangsu,213164

Online:2011-11-10 Published:2011-11-16
Supported by:

National Natural Science Foundation of China（No. 50875261，51075045）;
Key Technology R&D Program of Changzhou（No. CE20100050）

滑块型直线驱动并(混)联机构新型驱动装置及其变胞性研究

沈惠平1;赵海彬1;邓嘉鸣1;徐林森2;杨廷力1

1.常州大学,常州,213016

2.常州先进制造技术研究所,常州,213164

基金资助:
国家自然科学基金资助项目(50875261，51075045)；江苏省重大科技支撑与自主创新项目(BE2010074，BE2010061)；常州市科技攻关项目(CE20100050)
National Natural Science Foundation of China（No. 50875261，51075045）;
Key Technology R&D Program of Changzhou（No. CE20100050）

Abstract

Abstract:

This paper proposed that using a wire as driving devcie of a new higher accuracy linear driver, that is, the wire winded reel orderly by servo motor drive and drayed the working slider for a long linear reciprocating motion.And a new device that is a axial wire servo precise linear drive was designed,the structure and working principles were also introduced,the kinematics computation models were established.

Key words: parallel mechanism, parallel kineamtics mechanism, wire, linear driver, novel driving mechanism

摘要：

提出将钢丝伺服驱动作为并(混)联机构的驱动方式,该驱动方式是一种新型的具有较高精度的直线驱动方式,其原理为：通过伺服电机驱动使钢丝绳规则有序地缠绕在卷筒上并拖动滑块平台实现较长距离的往复直线运动。设计了一种单轴钢丝绳伺服精密直线驱动装置,介绍了其结构组成和工作原理,建立了其运动学计算模型;同时还研究了滑块型直线驱动并（混）联机构的变胞性,即变胞的条件、变胞的内容与过程及变胞实现的方法。

关键词:

并联机构, 并联运动装备, 钢丝绳, 直线伺服驱动, 新型驱动机构

CLC Number:

TP112

CHEN Hui-Beng-1, DIAO Hai-Ban-1, DENG Jia-Ming-1, XU Lin-Sen-2, YANG Ting-Li-1.

Research on Novel Driving Device and Metamorphic Characteristics for Parallel(Hybrid) Mechanism with Sliding-linear-drivers

[J]. China Mechanical Engineering, 2011, 22(21): 2540-2545.

沈惠平1, 赵海彬1, 邓嘉鸣1, 徐林森2, 杨廷力1.

滑块型直线驱动并(混)联机构新型驱动装置及其变胞性研究

[J]. 中国机械工程, 2011, 22(21): 2540-2545.

[1]	LU Kai-Jiang, SHI Dun-Beng, ZHANG Feng-Chao. Dynamics Optimization Design of Planar 3-DOF Parallel Mechanism [J]. J4, 201016, 21(16): 1926-1931.
[2]	XIONG Xiaochen, ZHOU Yan, ZHOU Xiangman, WU Haihua, HUA Lin, HU Zeqi, QIN Xunpeng, DENG Shaohua. Strength-ductility Synergy Control of Key Overflow Components of Hydro- turbines by Follow-up Hot-hammering-assisted Wire Arc Additive Remanufacturing [J]. China Mechanical Engineering, 2025, 36(12): 3010-3016.
[3]	YANG Haifeng1, 2, SUN Xinhui1, 2, YUAN Dongqing3, ZHAO Enlan1, 4, LIU Songyong1, 2, PENG Yuxing1, 2. Microstructure and Ultrasonic Rolling Hardening Mechanism of Laser Wire Feeding Cladding High Manganese Steel Coatings [J]. China Mechanical Engineering, 2024, 35(11): 2043-2053,2081.
[4]	TANG Chaoquan, TONG Binghang, TANG Wei, ZHANG Gang, WANG Siyuan, TANG Hongwei, LIU Bei, ZHOU Gongbo. Design of Twisting Climbing Wheeled Inspection Robot for Mining Wire Ropes [J]. China Mechanical Engineering, 2024, 35(10): 1732-1739.
[5]	CHEN Hengtong, WANG Xiaoguang, JIANG Hailong, LIN Qi. Analysis and Comparison of Kinematic Characteristics for Two Typical 6-DOF Suspension Mechanisms at High Angles of Attack [J]. China Mechanical Engineering, 2023, 34(06): 641-649.
[6]	FANG Xuewei, JIANG Xiao, WANG Zhe, WU Xiaokang, HUANG Ke. Forming Process Optimization of Wire and Arc Additive Manufactured High-strength Steel ER120S-G [J]. China Mechanical Engineering, 2023, 34(02): 218-225.
[7]	JIA Zhen, LI Shujuan, MA Gaoling, SHAO Wei, QIAO Chang, ZHANG Chen. Research on Cutting Mechanism of A-WEDM of Single-crystal Silicons [J]. China Mechanical Engineering, 2022, 33(20): 2459-2467,2475.
[8]	WANG Lanqing, HUANG Hui, CUI Changcai. Experimental Research of Surface Quality Evaluation Method for Wire Saw Sapphire Wafer [J]. China Mechanical Engineering, 2022, 33(17): 2023-2028.
[9]	LIU Jun, SHI Chaohuan, LIN Beiqing, HUANG He. Design and Steering Angle Control of Steering-by-Wire Hydraulic Systems for Multi-axle Vehicles [J]. China Mechanical Engineering, 2022, 33(14): 1741-1750.
[10]	ZHONG Yang, QIN Xiaobo, ZHENG Zhizhen, LI Jianjun, WANG Cheng. Study on Microstructure and Mechanics Properties of 2.25Cr-1Mo-0.25V Steel Fabricated by CMT Wire ARC Additive Manufacturing for Petrochemical Vessels [J]. China Mechanical Engineering, 2022, 33(10): 1251-1259.
[11]	XIA Hui, ZHENG Jun, QIU Jinchuan, WU Jianbo, WANG Jie. Research on ECT for Online Detection of Defects in Wire Ropes [J]. China Mechanical Engineering, 2022, 33(09): 1044-1050.
[12]	HAN Qinglin, GAO Jia, LI Xinlei, ZHANG Guangjun. Constituent and Property Adjustment of Deposited Metals by Dissimilar Auxiliary Wire Feed Gas Metal Arc-based Additive Manufacturing [J]. China Mechanical Engineering, 2022, 33(07): 858-863.
[13]	LI Rui, MENG Xianghui, XIE Youbai. Modeling Analysis of Key Friction Pairs in Low-speed Marine Diesel Engines and Verification of Friction Force Based on Wireless Measurement [J]. China Mechanical Engineering, 2022, 33(04): 380-387，396.
[14]	ZHOU Feng, ZHENG Lixia, SHEN Yechao, JIN Bo. Ultra-thin Diamond Wire Tension Control System Based on Adaptive Backstepping [J]. China Mechanical Engineering, 2021, 32(24): 2995-3000，3007.
[15]	HAN Zhao, FANG Xiaolong, ZHU Di. Experimental Study of WECM Trimming for Titanium-Aluminum Intermetallic Compounds [J]. China Mechanical Engineering, 2021, 32(23): 2808-2816.

Research on Novel Driving Device and Metamorphic Characteristics for Parallel(Hybrid) Mechanism with Sliding-linear-drivers

滑块型直线驱动并(混)联机构新型驱动装置及其变胞性研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics