Study on Relationship between Wear and Thermoelectric Potential of YW2 Cemented Carbides 

China Mechanical Engineering ›› 2010, Vol. 21 ›› Issue (17): 2037-2039.

Previous Articles Next Articles

Study on Relationship between Wear and Thermoelectric Potential of YW2 Cemented Carbides 

Chen Shunqing1;Meng Guangyao2

1.Shanghai Institute of Technology,Shanghai,200235

2.Qingdao University of Technology,Qingdao,Shandong,266033

Online:2010-09-10 Published:2010-09-20
Supported by:
Scientific Research Project of Ministry of Education of Shanghai（No. 08YZ167）

YW2硬质合金刀片的热电性能与其耐磨性的相关性

陈舜青1;孟广耀2

1.上海应用技术学院,上海,200235

2.青岛理工大学,青岛,266033

基金资助:
上海市教委科研基金资助项目(08YZ167)；上海应用技术学院科研基金资助项目(YJ2006-06)
Scientific Research Project of Ministry of Education of Shanghai（No. 08YZ167）

Abstract

Abstract:

The analyses and tests about the relationship between wear and thermoelectric potential of YW2 cemented carbide inserts were finished herein.The experimental results prove that the thermoelectric potentials E of the same mark cemented carbides are

very different,the thermoelectric potential E and the wear value VB of YW2 cemented carbide inserts are of very closely relationship, and the bigger thermoelectric potential E,the more serious wear for YW2 cemented carbide inserts.

Key words: metal cutting, cemented carbide, wear, thermoelectric potential

摘要：

以YW2硬质合金刀片的热电特性与磨损量为研究对象,通过大量实验分析了同批号YW2硬质合金刀片热电特性的分布以及磨损量与热电特性的相关性。实验表明,同一批号的YW2硬质合金刀片的热电特性是有一定差异的,而热电特性与其磨损量有很高的相关度。

关键词:

金属切削, 硬质合金, 磨损, 热电性能

CLC Number:

TG711

CHEN Shun-Jing, MENG An-Yao.

Study on Relationship between Wear and Thermoelectric Potential of YW2 Cemented Carbides 

[J]. China Mechanical Engineering, 2010, 21(17): 2037-2039.

陈舜青, 孟广耀.

YW2硬质合金刀片的热电性能与其耐磨性的相关性

[J]. 中国机械工程, 2010, 21(17): 2037-2039.

[1]	ZHU Qianye, FENG Shangyu, SHI Yanbin, PU Jibin. Friction and Wear Properties of MoS₂/Zn Films under Vacuum Atomic Oxygen Irradiation [J]. China Mechanical Engineering, 2026, 37(1): 83-91.
[2]	BAO Zhenke, CAO Huajun, QIN Fengze, CHEN Zhixiang, TAO Guibao. Tool Wear Monitoring Based on IWOA-IECA-BiLSTM Model [J]. China Mechanical Engineering, 2025, 36(12): 2936-2943.
[3]	XIAO Yufeng, ZHANG Chaoyong, Saixiyalatu , MENG Yifan, ZHU Chuanjun. Multi-step Ahead Real-time Prediction of Tool Wear Based on YOLOv11-Seg and Transformer Model [J]. China Mechanical Engineering, 2025, 36(12): 2944-2951.
[4]	Fujian SUN, Qianfang ZHU, Zhiqiang LIANG, Yanjun LU, Jinlong CHEN, Yubin XIAO, Hao HUANG, Jianping YUAN. Research on Tribological Properties of Hardened Bearing Steel Surfaces by Electric Pulse Assisted Hard Turning [J]. China Mechanical Engineering, 2025, 36(11): 2537-2543.
[5]	Song ZHANG, Chaoyong ZHANG, Chuanjun ZHU, Saixiyalatu BAO. In-situ Monitoring Method of Milling Cutter Wear Based on Spatial Attention Mechanism U-Net [J]. China Mechanical Engineering, 2025, 36(11): 2720-2727.
[6]	Shanshan LI, Xingwei SUN, Heng YANG, Heting QIAO. Research on Nonlinear Wear Behavior of Sealing Pairs in Magnetorheological Fluid Environment [J]. China Mechanical Engineering, 2025, 36(09): 1968-1979.
[7]	Songhua LI, Baoyuan XUE, Chuang ZUO. Study on Wear Performance of Si₃N₄ High Temperature Resistant All Ceramic Spherical Plain Bearings [J]. China Mechanical Engineering, 2025, 36(09): 1989-1995.
[8]	Shaogan YE, Tianxing CHEN, Ding CHEN, Kefei MIAO, Shoujun ZHAO, Huixiang LIU. Tooth Surface Modification and Anti-wear Design of Spline between Cylinder and Shaft of Piston Pumps [J]. China Mechanical Engineering, 2025, 36(08): 1767-1773.
[9]	JIANG Feng1, 2, HU Ronghui1, DENG Jiedong1, ZHANG Tian1, HUANG Guoqin1, 2, XU Yangli1, 2, LI Yousheng3, LIU Chao4. Development Trends and Prospects of Additive Manufacturing Technology for Cemented Carbide Cutting Tools [J]. China Mechanical Engineering, 2025, 36(06): 1300-1313.
[10]	XU Wentian1, LIANG Shulin1, CHI Maoru1, CAI Wubin2, TAO Gongquan1, WU Xingwen2. Wheel Polygonal Wear On-board Quantitative Diagnostic Method Based on Frequency Response Function [J]. China Mechanical Engineering, 2025, 36(05): 942-953.
[11]	HE Bin, ZHOU Xingyu, LU Hongyu, ZHANG Junfei, DING Kai, LI Qilin, LEI Weining. Study on Low Wear Machining Method of High Volume Fraction SiCp/Al Composite Materials by ECM-mechanical Combined Machining Processes Method [J]. China Mechanical Engineering, 2025, 36(04): 753-759.
[12]	SONG Jianfeng1, SHI Yinggang2, 3, HUANG Weijian3, ZHAO Yansong3, DONG Yonggang1. Quantitative Prediction of Tread Profile Variations during Emergency Braking of Heavy Duty Trains [J]. China Mechanical Engineering, 2025, 36(02): 369-379.
[13]	MO Hu, HU Yanping. Analysis of Restricting Factors for High-speed Applications of Single-seal Slippers [J]. China Mechanical Engineering, 2025, 36(01): 96-103.
[14]	LEI Fuyu1, XU Xiaoxu2, ZHAO Yaming2, LUO Jun1, MA Chao1, XU Congchang1, LI Luoxing13. Influences of Loading Angle on Fatigue Characteristics and Failure Modes of Self-piercing Riveted Joints in Aluminum Alloy 6082 [J]. China Mechanical Engineering, 2025, 36(01): 141-151.
[15]	JIANG Weiqi1, SHI Heng1, HUANG Haibo1, PENG Wei2, REN Rui1, DU Longfei1, XU Yiwei1. Characterization of Scattering Distribution of Tire Wear Particles in Heavy Container Trucks [J]. China Mechanical Engineering, 2024, 35(12): 2251-2258.

Study on Relationship between Wear and Thermoelectric Potential of YW2 Cemented Carbides 

YW2硬质合金刀片的热电性能与其耐磨性的相关性

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics