Parameter Identification of Nonlinear Hydro-pneumatic Suspensions Based on Feature Extraction in Time-frequency Domain

doi:10.3969/j.issn.1004-132X.2023.11.005

Abstract

Abstract: Considering the limitation of the nonlinear parameter identification method based entirely on the time domain or the frequency domain， a parameter identification method for nonlinear hydro-pneumatic suspensions was proposed based on feature extraction in time-frequency domain. The vehicle dynamics simulation models with nonlinear hydro-dynamic suspensions were established， the IFFT method was used to obtain the road excitation with the level of the standard road surface， the feature quantities in the time-frequency domain of the experimental results were extracted by combining with the wavelet analysis and filtering， and an optimization model for identification of nonlinear hydro-pneumatic suspension parameters was constructed. By minimizing the feature quantities of simulation and experimental results in the time-frequency domain， the nonlinear parameters of the hydro-pneumatic suspensions were accurately identified under actual conditions. The quantitative and qualitative analyses of the identification show that the identification results are accurate and reliable. By combining road time domain modeling， wavelet filtering technology and construction method for the optimization model with simulated annealing algorithm， an effective and reliable identification method was provided for parameter identification of nonlinear suspension systems.

Key words: hydro-pneumatic suspension, parameter identification, time-domain model on road, inverse fast Fourier transform（IFFT） method, wavelet analysis, simulated annealing algorithm

摘要： 针对完全基于时域或完全基于频域的非线性参数识别方法的局限性，提出了一种兼顾时频域特征量提取的非线性油气悬架参数识别方法。在建立含非线性油气悬架车辆动力学仿真模型的基础上，采用快速傅里叶逆变换法获得标准路面不平度等级的输入激励，结合小波分析和滤波处理提取实验结果的时频域特征量，构建非线性油气悬架参数识别的优化模型，通过最小化仿真结果与实验结果在时频域的特征量，实现了非线性油气悬架参数在实际工况下的准确识别。识别的定量与定性分析表明了识别结果的准确可靠。通过将路面时域建模技术、小波滤波技术和优化模型构造方法与模拟退火算法的有机结合，为非线性悬架系统的参数识别提供了一种有效可靠的方法。

关键词: 油气悬架, 参数识别, 路面时域建模, 快速傅里叶逆变换法, 小波分析, 模拟退火算法

CLC Number:

U463.33

WU Jianwei, SUN Beibei, JIANG Qiubo, CHEN Lin. Parameter Identification of Nonlinear Hydro-pneumatic Suspensions Based on Feature Extraction in Time-frequency Domain[J]. China Mechanical Engineering, 2023, 34(11): 1296-1305.

伍建伟, 孙蓓蓓, 江秋博, 陈林. 兼顾时频域特征量提取的非线性油气悬架参数识别[J]. 中国机械工程, 2023, 34(11): 1296-1305.

References

［1］李仲兴，郭子权，王传建，等. 越野车用两级压力式油气弹簧的建模与仿真［J］. 振动·测试与诊断， 2017， 37（3）：512-517.
LI Zhongxing， GUO Ziquan， WANG Chuanjian， et al. Modeling and Simulating of a Two Stage Pressure Hydro-pneumatic Spring for Off-road Vehicle［J］. Journal of Vibration， Measurement & Diagnosis， 2017， 37（3）：512-517.
［2］WU W， TANG H， ZHANG S， et al. High-precision Dynamics Characteristic Modeling Method Research Considering the Influence Factors of Hydropneumatic Suspension［J］. Shock and Vibration， 2020， 8：1-21.
［3］YANG L， WANG R， MENG X， et al. Performance Analysis of a New Hydropneumatic Inerter-based Suspension System with Semi-active Control Effect［J］. Journal of Automobile Engineering， 2020， 234：1883-1896.
［4］赵敬凯，谷正气，张沙，等. 矿用自卸车油气悬架力学特性研究与优化［J］. 机械工程学报. 2015， 51（10）：112-118.
ZHAO Jingkai， GU Zhengqi， ZHANG Sha， et al. Research and Optimization on the Mechanical Property of Mining Dump Trucks Hydro-pneumatic Suspension［J］. Journal of Mechanical Engineering， 2015， 51（10）：112-118.
［5］LI Z， WANG Y， DU H， et al. Modelling and Analysis of Full-vehicle Hydro-pneumatic Suspension System Considering Real-gas Polytropic Process［J］. Mechanical Systems and Signal Processing， 2022， 165（1）：1-21.
［6］BEST M C， GORDON T J. Suspension System Identification Based on Impulse-momentum Equations［J］. Vehicle System Dynamics， 1998（29S）：598-618.
［7］CUI Y， KURFESS T R. Vehicle Parameter Identification for Vertical Dynamics［J］. Journal of Dynamic Systems Measurement and Control—Transactions of the ASME， 2015， 137（2）：1-9.
［8］ELINGER J， ROGERS J. Information Theoretic Causality Measures for System Identification of Mechanical Systems［J］. Journal of Computational and Nonlinear Dynamics， 2018， 13（7）：1-12.
［9］THITE A N， BANVIDI S， IBICEK T， et al. Suspension Parameter Estimation in the Frequency Domain Using a Matrix Inversion Approach［J］. Vehicle System Dynamics， 2011， 49（12）：1803-1822.
［10］CALDEIRA A B， de CARVALHO M S， da COSTA NETO R T. Estimation of Tracked Vehicle Suspension Parameters［J］. Acta Scientiarum—Technology， 2017， 39（1）：51-57.
［11］XU B， ZHANG J， GUAN X. Estimation of the Parameters of a Railway Vehicle Suspension Using Model-based Filters with Uncertainties［J］. Journal of Rail and Rapid Transit， 2015， 229（7）：785-797.
［12］李翠梅，周洋. 非线性悬架系统的最小二乘参数识别方法［J］. 机械设计与制造， 2020（9）：62-65.
LI Cuimei， ZHOU Yang. The Least Squares Method Based Parameter Estimation of Nonlinear Vehicle Suspension Systems［J］. Machinery Design & Manufacture， 2020（9）：62-65.
［13］ZHAO Y， ALASHMORI M， BI F， et al. Parameter Identification and Robust Vibration Control of a Truck Drivers Seat System Using Multi-objective Optimization and Genetic Algorithm［J］. Applied Acoustics， 2021， 173（1）：1-13.
［14］BURDZIK R. Multidimensional Identification of Resonances Analysis of Strongly Nonstationary Signals， Case Study：Diagnostic and Condition Monitoring of Vehicles Suspension System［J］. Applied Acoustics， 2019， 144：51-63.
［15］WANG C， ZHANG J， ZHU H P. A Combined Method for Time-varying Parameter Identification Based on Variational Mode Decomposition and Generalized Morse Wavelet［J］. International Journal of Structural Stability and Dynamics， 2020， 20（7）：1-24
［16］金纯，孙会来，张文明，等. 工程车辆油气悬架分数阶建模与特性分析［J］. 农业机械学报， 2014， 45（5）：16-21.
JIN Chun， SUN Huilai， ZHANG Wenming， et al. Fractional Modeling and Characteristic Analysis of Hydro-pneumatic Suspension for Construction Vehicles［J］. Transactions of the Chinese Society for Agricultural Machinery， 2014， 45（5）：16-21.
［17］PAN Q， LI Y， HUANG M. Control-oriented Friction Modeling of Hydraulic Actuators Based on Hysteretic Nonlinearity of Lubricant Film［J］. Mechatronics， 2018， 53：72-84.
［18］YIN Y， RAKHEJA S， YANG J， et al. Characterization of a Hydro-pneumatic Suspension Strut with Gas-oil Emulsion［J］. Mechanical Systems and Signal Processing， 2018， 106：319-333.
［19］李兵，黄方平. 液压与气压传动［M］. 第2版. 武汉：华中科技大学出版社， 2016.
LI Bing， HUANG Fangping. Hydraulic and Pneumatic［M］. 2nd ed. Wuhan：Huazhong University of Science and Technology Press， 2016.
［20］刘献栋，邓志党，高峰. 基于逆变换的路面不平度仿真研究［J］. 中国公路学报， 2005（1）：126-130.
LIU Xiandong， DENG Zhidang， GAO Feng. Study of Simulation of Road Roughness Based on Inverse Transform［J］. China Journal of Highway and Transport， 2005（1）：126-130.
［21］鲍家定，伍建伟，王瀚超，等. 基于IFFT法的路面不平度时域模拟方法［J］. 现代电子技术， 2016， 39（20）：8-11.
BAO Jiading， WU Jianwei， WANG Hanchao， et al. Method for IFFT-based Time-domain Simulation of Road Roughness［J］. Modern Electronics Technique， 2016， 39（20）：8-11.
［22］RAJESH R. Vehicle Dynamics and Control［M］. Boston， MA：Springer， 2014.
［23］余志生. 汽车理论［M］. 第6版. 北京：机械工业出版社， 2018.
YU Zhisheng. Automobile Theory［M］. 6th ed. Beijing：China Machine Press， 2018.
［24］南京汽车研究所，郑州机械研究所. GB /T 7031—2005机械振动——道路路面谱测量数据报告［S］. 北京：中国标准出版社， 2005.
Nanjing Automotive Research Institute， Zhengzhou Machinery Research Institute. GB /T 7031—2005 Mechanical Vibration—Road Surface Spectrum Measurement Data Report［S］. Beijing：Standards Press of China， 2005.
［25］赵济海. 路面不平度的测量分析与应用［M］. 北京：北京理工大学出版社， 2000.
Zhao Jihai. Measurement Analysis and Application of Road Roughness［M］. Beijing：Beijing Institute of Technology Press， 2000.
［26］米承继，谷正气，伍文广，等. 随机载荷下矿用自卸车后桥壳疲劳寿命分析［J］. 机械工程学报， 2012， 48（12）：103-109.
MI Chengji， GU Zhengqi， WU Wenguang， et al. Fatigue Life Analysis of Rear Axle Housing of Mining Dump Truck under Random Load［J］. Journal of Mechanical Engineering， 2012， 48（12）：103-109.
［27］卢剑伟，王馨梓，吴唯唯. 路面随机激励下轻型货车驱动桥壳疲劳可靠性分析［J］. 汽车工程， 2016， 38（1）：122-126.
LU Jianwei， WANG Xinzi， WU Weiwei. Fatigue Reliability Analysis on the Driving Axle Housing of a Light Truck under Random Road Excitation［J］. Automotive Engineering， 2016， 38（1）：122-126.
［28］杨建国. 小波分析及其工程应用［M］. 北京：机械工业出版社， 2005.
YANG Jianguo. Wavelet Analysis and Its Engineering Applications［M］. Beijing：China Machine Press， 2005.
［29］刘习军，相林杰，张素侠. 基于小波分析的简支梁桥损伤识别［J］. 振动·测试与诊断， 2015， 35（5）：866-872.
LIU Xijun， XIANG Linjie， ZHANG Suxia. Damage Identification of Simply Supported Beam Bridges Based on Wavelet Analysis［J］. Journal of Vibration， Measurement & Diagnosis， 2015， 35（5）：866-872.
［30］徐中明，邱兆强，余烽，等. 全地形车车架固有特性分析与改型设计优选［J］. 机械科学与技术， 2011， 30（10）：1613-1617.
XU Zhongming， QIU Zhaoqiang， YU Feng， et al. The Analysis and Optimization of Natural Characteristics for the Frame of ATV［J］. Mechanical Science and Technology for Aerospace Engineering， 2011， 30（10）：1613-1617.
［31］许国根，赵后随，黄智勇. 最优化方法及其MATLAB实现［M］. 北京：北京航空航天大学出版社， 2018.
XU Guogen， ZHAO Housui， HUANG Zhiyong. Optimization Method and MATLAB Implementation［M］. Beijing：Beihang University Press， 2018.
［32］谭启迪，薄景山，常晁瑜，等. 基于模拟退火算法的设计反应谱标定方法［J］. 地震工程与工程振动. 2020， 40（1）：155-161.
TAN Qidi， BO Jingshan， CHANC Chaoyu， et al. Calibrating Method of Seismic Design Response Spectrum Based on Simulated Annealing Algorithm［J］. Earthquake Engineering and Engineering Dynamics， 2020， 40（1）：155-161.

[1]	LI Guolong, ZHAO Xiaoliang, WANG Yu, TAO Yijie. Operation Modal Analysis Method of Gear Grinding Machine Spindle Operations under Complex Working Conditions [J]. China Mechanical Engineering, 2026, 37(1): 51-59.
[2]	Xiumei LIU, Yunlong LUO, Beibei LI, Shen LIU, Qihang LIU, Yongtao LI, Qiao ZHAO. Research on Output Characterization of Hydro-penumatic Suspensions Considering Gas Dissolution and Temperature [J]. China Mechanical Engineering, 2025, 36(11): 2492-2500.
[3]	GAO Guanbin1, 2, ZHAO Siguo1, 2, LI Yingjie1, 2. Modeling and Identification of Robot End-payloads Based on Joint Torque Balance [J]. China Mechanical Engineering, 2025, 36(06): 1188-1197.
[4]	DU Kai, REN Yanqiang, HOU Yong, LI Xiaoqiang, CHEN Shuaifeng, SUN Liang, ZUO Xiaojiao, YUAN Xiaoguang. Parameter Identification Strategy of Yield Criterion for Accurately Predicting Anisotropic Behaviors under Near Plane Strain Loading [J]. China Mechanical Engineering, 2023, 34(19): 2381-2393.
[5]	DUAN Linchao, ZHANG Xugang, ZHANG Hua, SONG Huawei, AO Xiuyi. SOC Estimation of Lithium-ion Batterys Based on Second-order Approximation Extended Kalman Filter [J]. China Mechanical Engineering, 2023, 34(15): 1797-1804.
[6]	SUN Dong, WANG Ruochen, DING Renkai, CHEN Yijie. Semi-active Control of Hydro-pneumatic Suspensions for Mining Dump Trucks Based on Grey Wolf Algorithm [J]. China Mechanical Engineering, 2023, 34(04): 490-497.
[7]	XIA Junyong, LIU Kejin, ZHONG Fei, SUN Ying. Structural Parameter Identification for Articulated Arm Coordinate Measuring Machines Using Modified Teaching-learning-based Optimization Optimized by Simulated Annealing Algorithm [J]. China Mechanical Engineering, 2023, 34(03): 314-323.
[8]	GAO Wenbin, HUANG Qi, YU Xiaoliu, . Research on Geometric Error Analysis and Parameter Identification of Modular Robots [J]. China Mechanical Engineering, 2022, 33(07): 811-817，851.
[9]	TIAN Wenpeng1;DOU Jianming2,3;XU Xinxin3. Effects of Seven-axle HPS Coupling Scheme on Vehicle Body Attitude [J]. China Mechanical Engineering, 2020, 31(19): 2371-2378，2387.
[10]	XIE Shenglong1;LI Tiefeng2;WANG Binrui1;CHEN Dijian1. Hysteresis Modeling Method of Pneumatic Muscles Based on KP Model [J]. China Mechanical Engineering, 2020, 31(10): 1183-1189.
[11]	TIAN Mingming1;XIE Shejuan1,2; HAN Jie3,4;LI Peng2;PEI Cuixiang1;CHEN Zhenmao1. A Hybrid PECT/EMAT NDT Based on Wavelet Analysis [J]. China Mechanical Engineering, 2019, 30(16): 1925-1930.
[12]	LI Yongquan1,2;WU Pengtao1,2;ZHANG Yang1,2 ;ZHANG Lijie2,3. Dynamics Parameter Identification and Control of a Spherical 2-DOF Redundant Driven Parallel Robot System [J]. China Mechanical Engineering, 2019, 30(16): 1967-1975.
[13]	WEI Wei1,2;GENG Kuihua1,2;GENG Ainong3;WANG Shaowei1;LI Xinmo3. Frictional Force Test of Rotor Compressor Slides-chute Movement Deputy Based on LuGre Mode [J]. China Mechanical Engineering, 2019, 30(08): 932-938.
[14]	GUAN Chao;ZHANG Zeqiang;ZHU Lixia;MAO Lili. A MINLP Model and Improved Simulated Annealing Algorithm for Double-layer Corridor Allocation Problem [J]. China Mechanical Engineering, 2019, 30(08): 975-983.
[15]	CUI Fangyuan;HUA Dengxin;LI Yan;KONG Lingfei;LI Pengyang. A Merged Binding Modeling Method for Contact Fields of Bolted Joints [J]. China Mechanical Engineering, 2018, 29(16): 1912-1920.