Design and Sealing Analysis of Ultr-high Pressure Water Cleaning Rotary Device

Abstract

Abstract:

An ultr-high pressure water cleaning rotary plate was designed for the large wallrust removal climbing robot, the structure and working principles of the cleaning rotary plate were introduced, and the design directing at the cleaning rotary seal was calculated and analyzed. Practical applications show the cleaning plate meets the requirements of little leakage, high rust removal efficiency, and simultaneous drying during rust removal.

Key words: ultr-high pressure, rust removal, cleaning rotary plate, rotating seal

摘要：

设计了一种大型壁面清洗除锈爬壁机器人用的超高压旋转清洗盘，介绍了该旋转清洗盘的结构及工作原理，并针对清洗盘旋转密封的设计进行了计算和分析。实际的应用表明，该清洗盘能够满足泄漏量小、除锈效率高、即除即干的工作要求。

关键词: 超高压, 除锈, 清洗盘, 旋转密封

CLC Number:

TH137.5

Sun Ling, Gong Yongjun, Wang Zuwen, Zhang Zengmeng. Design and Sealing Analysis of Ultr-high Pressure Water Cleaning Rotary Device[J]. China Mechanical Engineering, 2014, 25(13): 1715-1718.

孙玲, 弓永军, 王祖温, 张增猛. 超高压旋转清洗盘的设计及密封分析[J]. 中国机械工程, 2014, 25(13): 1715-1718.

References

[1]付宜利，李志海．爬壁机器人的研究进展[J]．机械设计，2008，25(4)：1-4．
Fu Yili，Li Zhihai．Researching Headway of Wall-climbing Robots[J]．Journal of Machine Design，2008，25(4)：1-4．[2]薛胜雄．高压水射流技术工程[M]．合肥：合肥工业大学出版社，2006．
[3]JETECH. Rotating Seals ．[2014-03-04]．http://www.jetech.com/water-jetting-tools/rotating-seals．
[4]Hammelmann(天津)有限公司.应用附件．[2012-12-04]．http://www.hammelmann.cn/products-detail.asp?id=&parentid=1&childid=30&pname=%D3%A6%D3%C3%B8%BD%BC%FE．
[5]KAMAT.Rotating nozzles．[2012-12-04]．http://www.kamat.de/Pump-accessories/High-pressure-nozzles/1_340.html．
[6]任启乐，薛胜雄，陈正文，等．高压旋转密封中填料密封技术的分析与改善[J]．清洗世界，2009，25 (12)：34-38．
Ren Qile，Xue Shengxiong，Chen Zhengwen，et al．Reasearch of Packing and Sealing Technology in High Pressure Water Revolving Sealing[J]．Cleaning World，2009，25(12)：34-38．
[7]薛胜雄，陈正文，盛业涛,等．美国高压水射流技术现状[C]//2006年中国机械工程学会年会暨中国工程院机械与运载工程学部首届年会论文集．北京：中国机械工程学会，2006：11-17．
[8]王庆国，周丹．高压水间隙密封旋转喷头的研制及应用[J]．机械开发，2000(4)：66-68．
Wang Qingguo，Zhou Dan. Development and Application of Rotating Nozzle with High Pressure Water Crevice Seal[J]. Machine Development，2000(4)：66-68．
[9]王正钦，管华，刘庭成．高压水射流清洗技术中的旋转喷头[J]．清洗世界，2007，23(1)：31-34．
Wang Zhengqi，Guan Hua，Liu Tingcheng．Rotating Nozzle for High Pressure Water-jet Cleaning Technology[J]．Cleaning World，2007，23(1)：31-34．
[10]马汝涛，徐义，祁万军，等．高压水射流清洗油管旋转喷头的设计及应用[J] ．石油机械，2007，35(10)：29-32．
Ma Rutao, Xu Yi, Qi Wanjun. The Design and Application of High Pressure Water Jet Rotary Nozzle on Cleaning Oil Pipe[J]. China Petroleum Machinery, 2007，35(10)：29-32.

[1]	HE Lejun, XI Yi, LIU Wen, YAN Xiang, XIN Mingjie, WANG Chaoyang. Application Research of High-precision Sensing Mechanisms Based on Pressure Amplification [J]. China Mechanical Engineering, 2025, 36(12): 2870-2874.
[2]	Lejun HE, Yi XI, Wen LIU, Xiang YAN, Mingjie XIN, Chaoyang WANG. Design Methodologies for High-precision Sensing Mechanisms Based on Pressure Amplification [J]. China Mechanical Engineering, 2025, 36(11): 2601-2608.
[3]	CHEN Yuan1, XIONG Dianfeng1, LI Yuntang1, GAO Yongcao2, LI Chuancang2, WANG Bingqing1, JIN Jie1. Lubrication Characteristics of Gear End Face Friction Pairs of Aviation High-speed Gear Pumps [J]. China Mechanical Engineering, 2024, 35(07): 1178-1187.
[4]	HANG Yang, YAN Kanghao, HUANG Dan. Analyses of Friction and Sealing Characteristics of Piston/Bushing Interfaces Considering Elastic Deformations#br# [J]. China Mechanical Engineering, 2023, 34(01): 17-26.
[5]	YE Shaogan, LAI Weiqun, HOU Liang, BU Xiangjian. Modeling and Experimental Validation of Lubrication Characteristics of Spherical Valve-plate Pairs with Conical Cylinder Block [J]. China Mechanical Engineering, 2022, 33(20): 2420-2428，2436.
[6]	LIAO Yihong, ZHANG Guiming, XU Jing. Influence Law and Mechanism of Texturized Controllable Interfaces on Leakage of Steam Turbine Regulating Valves [J]. China Mechanical Engineering, 2022, 33(12): 1427-1434.
[7]	ZHAO Guochao, WANG Hui, SUN Yuanjing, ZHANG Changshuai. Experimental Research on Interactions of Slotted Parameters for Rotary Distributing Excitation Control Valves#br# [J]. China Mechanical Engineering, 2021, 32(09): 1035-1042.
[8]	SHAO Junpeng；XU Longfei；SUN Guitao. Analysis of Anti-eccentric Load Characteristics of Hydraulic Cylinder Hydrostatic Supports [J]. China Mechanical Engineering, 2020, 31(18): 2174-2180.
[9]	NIE Songlin1;LI Shuo1;YIN Fanglong1;ZHOU Xin1;HU Zhen2. Study on Fluid-Solid Coupling of Deformation Characteristics of Piston Bush in Water Hydraulic Pumps [J]. China Mechanical Engineering, 2020, 31(10): 1135-1141.
[10]	LIU Siyuan1,2;WANG Guangda1,2;SUN Hongmei3;LIU Jianxun4;JIANG Wanlu1,2. Prediction Method of Performance of Intelligent Hydraulic Components Based on Lubrication Mechanism [J]. China Mechanical Engineering, 2020, 31(08): 952-959.
[11]	ZHANG Jin1,2,3;XUE Xiongwei1;KOU Chenghao1;YAO Jing1,3;KONG Xiangdong1,3;LI Hao4. Modeling of DN63 Displacement-follower Ultra High Pressure Proportional Cartridge Valves [J]. China Mechanical Engineering, 2019, 30(20): 2424-2430,2438.
[12]	ZHAI Fugang1;ZHAO Guichun1;WEI Lizhong1;YAO Jing1,2;LI Dongming3. Energy Recovery and Control of Forging Manipulators Based on Matrix Circuit [J]. China Mechanical Engineering, 2019, 30(14): 1688-1695.
[13]	WEN Desheng; SUI Guangdong;LIU Qiaoyan;LIU Xiaoxue. Leakage Analysis and Test of Internal and External Double-row Force Type Radial Piston Motor [J]. China Mechanical Engineering, 2019, 30(12): 1423-1428.
[14]	YAO Jing1,2,3;LI Yao3;ZHAI Fugang3;ZHU Hanyin3;ZHANG Yin4. Energy Dissipation Analysis of Forging Manipulator Hydraulic Systems in Stretching Processes [J]. China Mechanical Engineering, 2019, 30(04): 385-392.
[15]	LIU Bin1;PAN Guixiang1;LI Peng1;JIANG Jiahao1;LIU Shuang1;LIU Zhaolun2. Characteristics and Control of Rolling Mills under Nonlinear Spring Forces of Hydraulic Cylinders [J]. China Mechanical Engineering, 2018, 29(24): 2925-2932.