#br#
Improvement of 3D Contact Problem FEA under Variable Friction Condition

China Mechanical Engineering ›› 2012, Vol. 23 ›› Issue (16): 1929-1933.

Previous Articles Next Articles

#br# Improvement of 3D Contact Problem FEA under Variable Friction Condition

Li Qunsong1;Zhu Ying2;Tan Hailin1;Zhang Jiqing3

1.Hunan Chemical Industry Vocation Technology College,Zhuzhou,Hunan,412004
2.Hunan University of Technology,Zhuzhou,Hunan,412007
3.Hunan Yongzhou Special Equipment Examination Institute,Yongzhou,Hunan,425000

Online:2012-08-25 Published:2017-05-27
Supported by:
Hunan Provincial Program of Ministry of Science and Technology of China（No. 2010JT4059）

变摩擦条件下三维接触问题有限元分析改进

李群松1;朱;颖2;谭海林1;张继清3

1.湖南化工职业技术学院,株洲,412004
2.湖南工业大学,株洲,412007
3.湖南特种设备检验检测研究院永州分院,永州,425000

基金资助:
湖南省科技厅一般项目（2010JT4059)
Hunan Provincial Program of Ministry of Science and Technology of China（No. 2010JT4059）

Abstract

Abstract:

The three-dimensional elastic contact problem with the variable friction model was studied.The contact conditions were imposed along the contact nodes' normal and sliding directions.The program packages for contact solution were designed using FORTRAN language,which were applied to investigate an
example of contact problem with a velocity-correlation friction model.The variations of nodes'contact states and contact forces with sliding velocity were examined.Eventually,the validity of the proposed algorithm and the designed program packages were verified by comparing the computed results with that obtained from the commercial software.

Key words: gear, contact, variable friction model, finite element analysis(FEM)

摘要：

首先对三维弹性接触问题的有限元求解算法进行研究,将接触条件转换到法向与滑动方向组成的局部二维坐标系内进行求解,并利用FORTRAN语言编制接触问题求解的程序包。然后应用该程序包对变摩擦条件下的接触算例进行研究,揭示摩擦因数随滑动速度改变时接触点随接触状态、接触力的变化规律。最后利用有限元软件对计算结果进行验证,证明了算法的有效性。


关键词: 齿轮, 接触, 变摩擦模型, 有限元方法

CLC Number:

TH117

LI Qun-Song-1, SHU,YING 2, TAN Hai-Lin-1, ZHANG Ji-Qing-3. #br# Improvement of 3D Contact Problem FEA under Variable Friction Condition[J]. China Mechanical Engineering, 2012, 23(16): 1929-1933.

李群松1, 朱, 颖2, 谭海林1, 张继清3. 变摩擦条件下三维接触问题有限元分析改进[J]. 中国机械工程, 2012, 23(16): 1929-1933.

[1]	CHEN Li-Feng, TUN Xiao-Ling, QIN Da-Tong, XIAO Zheng-Meng. Study on Frictional Power Losses of Spur Gear [J]. J4, 201016, 21(16): 1911-1915.
[2]	WANG Rong, LI Junjie, ZHENG Wenge, WANG Jia, HE Mingrong. Gear Fatigue Damage Prediction with Coupling Effect of Environmental Randomness and Load Sequence [J]. China Mechanical Engineering, 2026, 37(1): 105-113.
[3]	ZHANG Ziyang, GONG Yajing, WANG Yuechang. Method for Accelerated Tribological Property Evolution Experiments of Conformal Contact Surfaces in Mixed Lubrication Regime [J]. China Mechanical Engineering, 2026, 37(1): 22-29.
[4]	ZHANG Xu, LI Congbo, ZHANG You, ZHANG Chenghui, ZHOU Feng. Geometric Parameter Optimization Method of Honing Wheels for Lower-noise Texture [J]. China Mechanical Engineering, 2025, 36(12): 2875-2884.
[5]	LUO Min, HUANG Congjian, LI Qiaozheng, XU Tingting, FU Yanbo. Investigation of Factors Influencing Expandable Tubes Milling Based on SPH-FEM Coupling Algorithms [J]. China Mechanical Engineering, 2025, 36(12): 2927-2935.
[6]	LIU Chengshuo, LIN Xiaojun, ZHONG Bo, DENG Wenhui. Technology on Flexible Polishing for Leading and Trailing Edges of Blisk Blades [J]. China Mechanical Engineering, 2025, 36(12): 3047-3056.
[7]	Shuai MO, Xuan HUANG, Wenbin LIU, Wei ZHANG. Nonlinear Dynamics of Continuously Tunable Planetary Gear Metamaterial [J]. China Mechanical Engineering, 2025, 36(11): 2509-2516.
[8]	Hengyi LEI, Xuesong DU, Zilong JIANG, Caichao ZHU. New Parallel Compound Movable Tooth Transmission Principle and Its Meshing Characteristics [J]. China Mechanical Engineering, 2025, 36(11): 2517-2524.
[9]	Haoxi ZHANG, Jie JIANG, Gang JIANG, Yue LI, Xing'an HAO. Study on Mechanics Model of Leg Lift Retardation for Hexapod Robot in Clay Environment [J]. China Mechanical Engineering, 2025, 36(09): 1996-2002.
[10]	Xudong WANG, Jing ZHAO. Research on Contact Properties of Clamp-Shear-Grab Integrated Attachments under Self-locked States [J]. China Mechanical Engineering, 2025, 36(09): 2117-2125.
[11]	Chenfan JIA, Huaiju LIU, Caichao ZHU, Taimin CHEN, Jinxiao CHEN. An Aviation Gear Bulk Temperature Prediction Method and Verification Research Based on CatBoost [J]. China Mechanical Engineering, 2025, 36(08): 1658-1667.
[12]	Jinzhan SU, Yaoke FENG, Bin LIU, Xinlong CAO, Linlin SUN. Analysis and Optimization of Meshing Performance of Straight Bevel Gears Machined by Dual Interlocking Circular Cutters [J]. China Mechanical Engineering, 2025, 36(08): 1683-1690.
[13]	Shaogan YE, Tianxing CHEN, Ding CHEN, Kefei MIAO, Shoujun ZHAO, Huixiang LIU. Tooth Surface Modification and Anti-wear Design of Spline between Cylinder and Shaft of Piston Pumps [J]. China Mechanical Engineering, 2025, 36(08): 1767-1773.
[14]	HUANG Hao1, WANG Zeng2, LI Bo2, LU Zehua1, LIU Huaiju1. Structure-thermal Compliance Collaborative Topology Optimization of Aero-engine Gears Transmission Case Based on Compromise Programming Method [J]. China Mechanical Engineering, 2025, 36(07): 1471-1478.
[15]	LI Guangjun1, 2, MA Jing1, 2, DUAN Hong1, 2, HU Xiwen1, 2, XU Lei1, 2, MAO Shimin3, PENG Xianlong4. Numerical Rolling Tests of Actual Measured Tooth Surfaces for Oversized Face Gears [J]. China Mechanical Engineering, 2025, 36(05): 1008-1017.

#br# Improvement of 3D Contact Problem FEA under Variable Friction Condition

变摩擦条件下三维接触问题有限元分析改进

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics