Nonlinear Model Predictive Control of Trajectory Tracking for Nonholonomic AGV

China Mechanical Engineering ›› 2011, Vol. 22 ›› Issue (6): 681-686.

Previous Articles Next Articles

Nonlinear Model Predictive Control of Trajectory Tracking for Nonholonomic AGV

Zhao Han;Yin Xiaohong;Wu Yanming

Hefei University of Technology,Hefei,230009

Online:2011-03-25 Published:2011-04-15
Supported by:

The National Key Technology R&D Program（No. 2006036003131）;
National High-tech R&D Program of China (863 Program) （No. 2006AA11A109）

非完整约束AGV轨迹跟踪的非线性预测控制

赵韩;尹晓红;吴焱明

合肥工业大学,合肥,230009

基金资助:
国家“十一五”支撑计划资助项目(2006036003131)；国家高技术研究发展计划(863计划)资助项目(2006AA11A109)
The National Key Technology R&D Program（No. 2006036003131）;
National High-tech R&D Program of China (863 Program) （No. 2006AA11A109）

Abstract

Abstract:

Considering the kinematic model of three-wheeled AGV with non-holonomic constraint and input saturation,a nonlinear model predictive control was studied and an united control algorithm of tracking and stability was proposed. Firstly, an optimal controller was obtained based on the principles of model predictive control.Secondly, a terminal controller and an invariantterminal region were designed in order to keep the AGV system stable.Then，the noise problem of state estimation was solved by using a state observer, which improves the localization precision and enhances the control effectiveness.Finally，a module was designed to avoid obstacle. The designed control algorithm has generality for kinematic model of other wheeled mobile robots. Computer simulation results show its correctness and validness.

Key words:

automatic guided vehicle(AGV), model predictive control, stability, observer, trajectory tracking

摘要：

针对存在非完整约束和控制输入约束的三轮AGV模型，研究其非线性模型预测控制策略，提出了一种跟踪与镇定统一控制算法。首先由模型预测控制原理产生一个优化控制器，接着设计终端控制器及不变终端域来保证系统的镇定，然后设计状态观测器以进一步提高跟踪精度，最后设计避障控制模块来完善整个控制器功能。该控制算法具有一般性，对所有AGV及其他轮式移动机器人的运动学模型都适用。计算机仿真结果验证了该控制算法的正确性和有效性。

关键词:

AGV, 模型预测控制, 镇定, 观测器, 轨迹跟踪

CLC Number:

TP24



DIAO Han, YIN Xiao-Gong, TUN Yan-Meng. Nonlinear Model Predictive Control of Trajectory Tracking for Nonholonomic AGV[J]. China Mechanical Engineering, 2011, 22(6): 681-686.

赵韩, 尹晓红, 吴焱明.

非完整约束AGV轨迹跟踪的非线性预测控制

[J]. 中国机械工程, 2011, 22(6): 681-686.

[1]	SUN Dong-Shu, HU Feng-Bin, QIN Da-Tong, LIU Zhen-Jun. An Experimental Analysis on Thermal Stress Distributions in a Multiple Disc Wet Brake [J]. J4, 201016, 21(16): 2006-2010.
[2]	DIAO Wei, WANG Zhi-Yuan, ZHOU Zhi-Li. Simulation Research on Truck Braking Stability on Turn of an Continuous Downgrade [J]. J4, 201016, 21(16): 2010-2015.
[3]	Yang LI, Hongyu WEI. Optimization and Experiments of Flow-guiding Structure of Cathode in Electrochemical Machining of Internal Splines [J]. China Mechanical Engineering, 2025, 36(11): 2658-2664.
[4]	Xinyou LIN, Zhongwei JIN, Yunliang TANG. Vehicle Lateral Control Strategy Integrating Road Curvature Feedforward [J]. China Mechanical Engineering, 2025, 36(11): 2774-2782.
[5]	YIN Xizhi1, 2, 3, HU Sanbao1, 2, 3, FENG Zhiyong1, 2, 3. Vehicle Yaw and Roll Stability Control Based on Dynamic Output Feedback [J]. China Mechanical Engineering, 2025, 36(07): 1453-1462.
[6]	JIA Cunde1, 2, 3, KONG Xiangdong1, 2, 3, LI Shaoguang1, 2, 3, LI Junfei4, ZHANG Junyong1, 2, 3, FENG Junxue5, AI Chao1, 2, 3, JIANG Wenguang1, 2, 3. Research on Double Layer Sliding Mode Control of Large Scale Discrete Systems under High Frequency Time Varying Loads [J]. China Mechanical Engineering, 2025, 36(05): 911-922.
[7]	DU Bing1, 2, LI Yang1, 2, LIU Fenghua1, 2, DONG Mingxin1, 2, WAN Yufan1, 2, ZHONG Qingshuai1, 2. Establishment and Influences of Critical Wrinkling Criterion of Sheet Metals Considering Thickness Stress [J]. China Mechanical Engineering, 2025, 36(05): 1074-1082.
[8]	KAN Xiaobo1, ZHAO Youqun1, LI Danyang1, LIN Fen1, HE Kunpeng1, 2, YOU Qingshen2. Multi-objective Torque Coordination Control for Distributed Drive Electric Vehicles Based on Nonlinear MPC [J]. China Mechanical Engineering, 2025, 36(05): 1123-1131.
[9]	WANG Jian1, ZHANG Ming1, LIU Song1, QUAN He1, FENG Chao1, ZHANG Zhe2. Simulation and Experimental Analysis for Active Vehicle Interior Noise Control Based on FFxLMS [J]. China Mechanical Engineering, 2025, 36(04): 850-856.
[10]	HE Zhicheng1, WANG Yufan1, WEI Baolv1, 2, LI Zhi1, BU Tengchen1. Research on Path Tracking Control Based on Optimized Dynamics Model [J]. China Mechanical Engineering, 2024, 35(06): 1000-1009.
[11]	LI Jian1, 2, WANG Hongwei3, MU Zongyi3, DU Yanbin1, RAN Yan4. Research on Reliability Allocation Method for Mechanical Systems Considering Performance Stability [J]. China Mechanical Engineering, 2024, 35(05): 821-828,850.
[12]	LIU Junling, FENG Ganghui, ZHANG Junjiang, YANG Kai. Fusion Research of Trajectory Tracking Energy-saving Control of Unmanned Hybrid Vehicles [J]. China Mechanical Engineering, 2024, 35(04): 678-690.
[13]	YUAN Zhiqun, LI Yuehan, LIN Li, SUN Pengfei, ZHANG Yi, . Longitudinal and Lateral Coordination Control of Cars with Aerodynamic Interference of Wind-vehicle-bridge System [J]. China Mechanical Engineering, 2024, 35(04): 731-741.
[14]	CHEN Lijuan, WU Die, GAO Wei, WEI Longzheng, CAO Shengwei, AI Chao, LI Jingbin. Research on Active Power Control of Hydraulic Wind Turbines Based on Feedback Linearization and Nonlinear Disturbance Compensation [J]. China Mechanical Engineering, 2023, 34(23): 2889-2897.
[15]	MIN Delei, TONG Ruting, WEI Yintao. Yaw Rate Calculation and Vehicle Stability Control Considering Tire Nonlinearity [J]. China Mechanical Engineering, 2023, 34(21): 2521-2530.

Nonlinear Model Predictive Control of Trajectory Tracking for Nonholonomic AGV

非完整约束AGV轨迹跟踪的非线性预测控制

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics