Optimization Design of Electric Vehicle Transmission Gear Ratio

Abstract

Abstract:

In connection with the problems to select the transmission number and ratio of pure electric vehicles,according to the requirements of road conditions in Chinese cities and in the case of parameters of electric drive motor and electric vehicle were set,taking the transmission ratio as a variable, the transmission ratio range which can meet the demands of power performance was defined preliminarily after the theoretical basis of the definition of transmission gear number was analyzed.Taking energy efficiency optimization as target, optimization of the transmission ratio of electric vehicles was studied and a visual optimization design method was established finally. Practical applications

show that the proposed method can design the number and the transmission gear ratio

for a pure electric vehicle which will meet the requests of road conditions and achieve

the optimal efficiency of energy utilization.

Key words:

transmission ratio, electric vehicle, power, efficiency of energy utilization

摘要：

针对纯电动汽车传动装置挡位数和传动比选择的问题,根据城市道路条件要求,在电机和电动汽车整备参数已定的情况下,以传动比为变量,分析传动装置挡位数确定的理论依据,初步确定满足动力性能的传动比范围。以能量利用率为优化目标,研究电动汽车传动比的优化,提出一种直观的传动比优化设计方法。应用实践表明,该方法能够为纯电动汽车设计出既满足道路行驶要求又能够达到能量利用率最优的挡位数和传动比。

关键词:

传动比, 电动汽车, 动力性, 能量利用率

CLC Number:

U463.2

HUANG Kang, LUO Shi-Shuai, WANG Fu-Lei.

Optimization Design of Electric Vehicle Transmission Gear Ratio

[J]. China Mechanical Engineering, 2011, 22(5): 625-629.

黄康, 罗时帅, 王富雷.

纯电动汽车动力系统传动比优化设计

[J]. 中国机械工程, 2011, 22(5): 625-629.

[1]	CHEN Li-Feng, TUN Xiao-Ling, QIN Da-Tong, XIAO Zheng-Meng. Study on Frictional Power Losses of Spur Gear [J]. J4, 201016, 21(16): 1911-1915.
[2]	ZHANG Xu, LI Congbo, ZHANG You, ZHANG Chenghui, ZHOU Feng. Geometric Parameter Optimization Method of Honing Wheels for Lower-noise Texture [J]. China Mechanical Engineering, 2025, 36(12): 2875-2884.
[3]	Hengyi LEI, Xuesong DU, Zilong JIANG, Caichao ZHU. New Parallel Compound Movable Tooth Transmission Principle and Its Meshing Characteristics [J]. China Mechanical Engineering, 2025, 36(11): 2517-2524.
[4]	Enzhe SONG, Zongwei GUO, Tian YANG, Lili LU, Chong YAO, Qiangzhi XIN, Baofu JIA. Experimental Study of Propulsion Characteristics of Marine Methanol⁃Diesel Dual⁃fuel Engines [J]. China Mechanical Engineering, 2025, 36(11): 2766-2773.
[5]	Biaofei SHI, Xiaoming YE, Haoyu LYU, Feng LAI. Research on Differential Steering Mechanism Based on Tire Cornering [J]. China Mechanical Engineering, 2025, 36(10): 2224-2231.
[6]	Xiaodong YAN, Gongbo ZHOU, Ping ZHOU, Lianfeng HAN, Qing LI, Shuang CAO. Power Generation Performance of Hybrid Piezoelectric Vibrator Based on Rotational Magnetic Force-wind Induced Vibrations [J]. China Mechanical Engineering, 2025, 36(10): 2249-2257.
[7]	Xinyao TANG, Rong YIN, Xupeng WANG, Jiayin YANG, Xiaoyi LIU, Yuyang HAO. Design and Optimization of Human-machine Compatibility of Knee-ankle Exoskeletons [J]. China Mechanical Engineering, 2025, 36(10): 2369-2378.
[8]	Huaqing ZHANG, Jiusheng BAO, Lei ZHANG, Deping HU, Xiao WEI, Yan YIN, Haohao XIE, Chenzhong ZHU, Jiao YANG. Design and Control Strategy Research of PS Type Hybrid Power Systems for 100 Ton Double Bridge Rigid Mine Trucks [J]. China Mechanical Engineering, 2025, 36(10): 2453-2462.
[9]	Shenting ZHANG, Jin LEI, Wenxing JIA, Xinyu ZHANG, Peng JIN, Xinyan QIN. Dynamic Response Analyses of Power Transmission Lines under Moving Loads [J]. China Mechanical Engineering, 2025, 36(09): 2126-2139.
[10]	YIN Xizhi1, 2, 3, HU Sanbao1, 2, 3, FENG Zhiyong1, 2, 3. Vehicle Yaw and Roll Stability Control Based on Dynamic Output Feedback [J]. China Mechanical Engineering, 2025, 36(07): 1453-1462.
[11]	SHI Peicheng1, SHAN Zixian1, ZHU Hailong1, HAI Bin2, WANG Lei2, LU Fayan2. Integrated Design Technology for New Energy Vehicle Power Battery Systems [J]. China Mechanical Engineering, 2025, 36(07): 1611-1623.
[12]	SHI Zhiyuan1, 2, KONG Zhiwei2, CHEN Junzhen3, WANG Shuying3. Research on Construction Techniques for Wind Power Equipment Contextual Knowledge Graphs [J]. China Mechanical Engineering, 2025, 36(06): 1206-1213.
[13]	LIAO Qiansheng1, 3, LIU Hesheng2, KUANG Tangqing2, LIU Jiahao2, ZHANG Wei2. Effects of Glass Fiber Mass Fraction on W-PACIM Pipes of Long Glass Fiber Reinforced Polypropylene [J]. China Mechanical Engineering, 2025, 36(06): 1329-1337.
[14]	SUN Xiaojun1, LIU Conghao1, ZHANG Qiao1, SONG Enzhe2. Research on Hybrid Power Energy Management Strategy Based on Sequential Real-time Decision Making with Hybrid Model Predictive Control [J]. China Mechanical Engineering, 2025, 36(06): 1380-1393.
[15]	KAN Xiaobo1, ZHAO Youqun1, LI Danyang1, LIN Fen1, HE Kunpeng1, 2, YOU Qingshen2. Multi-objective Torque Coordination Control for Distributed Drive Electric Vehicles Based on Nonlinear MPC [J]. China Mechanical Engineering, 2025, 36(05): 1123-1131.