Experimental Research on Identification of Dynamic Characteristic Parameters of Rolling Guide's Joint

China Mechanical Engineering ›› 2011, Vol. 22 ›› Issue (4): 415-418.

Previous Articles Next Articles

Experimental Research on Identification of Dynamic Characteristic Parameters of Rolling Guide's Joint

Zhang Hua;Yuan Juntang;Wang Zhenhua

Nanjing University of Science and Technology,Nanjing,210094

Online:2011-02-25 Published:2011-03-15
Supported by:
National Science and Technology Major Project ( No. 2009ZX04014-036)

滚动导轨结合面动态特性参数识别实验研究

张华;袁军堂;汪振华

南京理工大学,南京,210094

基金资助:
国家科技重大专项(2009ZX04014-036)
National Science and Technology Major Project ( No. 2009ZX04014-036)

Abstract

Abstract:

In order to identify the dynamic characteristic parameters of

rolling guide's joint, a measurement model of equivalent single degree of freedom system was established. This model simplified the institution with rolling guides installed to single degree of freedom system and eliminated the influences of the base

displacements on parameter identification. Based on the measurement model,a measuring device for identifying the dynamic characteristic parameters of rolling guide was developed. The MRC45 linear rolling guide of Schneeberger was selected as an example to

measure the dynamic characteristic parameters of its joint.The dynamic stiffness with high precision in normal and tangential sides of rolling guide was obtained and the effects of load on dynamic stiffness were also analyzed.

Key words:

rolling guide, joint, dynamic stiffness, parameter identification

摘要：

建立了识别滚动导轨结合面动态特性参数的测量模型。该测量模型将安装有滚动导轨的机构简化为单自由度系统,消除了基础位移对参数识别的影响。基于测量模型,研制了滚动导轨结合面动态特性参数测量装置。以施耐博格MRC45滚动导轨为实验对象,测量了其结合面动态特性参数,准确获得了法向和侧向动态刚度并分析了载荷变化对动态刚度的影响规律。

关键词:

滚动导轨, 结合面, 动态刚度, 参数识别



CLC Number:

TH11

ZHANG Hua, YUAN Jun-Tang, HONG Zhen-Hua.

Experimental Research on Identification of Dynamic Characteristic Parameters of Rolling Guide's Joint

[J]. China Mechanical Engineering, 2011, 22(4): 415-418.

张华, 袁军堂, 汪振华.

滚动导轨结合面动态特性参数识别实验研究

[J]. 中国机械工程, 2011, 22(4): 415-418.

[1]	GAO Chuanbao, ZHANG Xinyue, CEN Jiajia, CHEN Qin, FENG Haiyan, CHEN Kai, ZHANG Dekun. Tribological Properties of Polyelectrolyte-Modified PEEK Composite Materials [J]. China Mechanical Engineering, 2026, 37(1): 14-21.
[2]	Haiping LIANG, Yaoan LU, Weijia LIAN, Chengyong WANG. A Smooth Motion Path Planning Method for Six-axis Robots Considering Redundancy [J]. China Mechanical Engineering, 2025, 36(11): 2652-2657.
[3]	Xinyao TANG, Rong YIN, Xupeng WANG, Jiayin YANG, Xiaoyi LIU, Yuyang HAO. Design and Optimization of Human-machine Compatibility of Knee-ankle Exoskeletons [J]. China Mechanical Engineering, 2025, 36(10): 2369-2378.
[4]	Kai WANG, Liudong GU, Yifan ZHOU. Joint Optimization of Inspection， Maintenance and Spare Parts Inventory Based on POMDP Model [J]. China Mechanical Engineering, 2025, 36(08): 1853-1863.
[5]	ZHANG Guangshuai, SUN Liangbo, LIU Xiaocui, ZHANG Deping, ZHOU Huaxi. Isomorphism Identification Method for Kinematic Chain Based on Exchange and Comparison of Lower Triangular Matrix with Whole Information [J]. China Mechanical Engineering, 2025, 36(06): 1178-1187，1221.
[6]	GUAN Jiaoyue1, GAO Yuan1, AI Yanting1, TIAN Jing1, YAO Yudong2. Thread Extension Stress Analysis of Bolts under Pre-tensioning Conditions [J]. China Mechanical Engineering, 2025, 36(05): 923-932.
[7]	GUO Wanjin1, 2, 3, 4, LI Ru1, WANG Libin1, HAO Qinlei1, CAO Chuqing2, ZHAO Lijun2, 4. A Robot Stiffness Identification Method Considering Weakly Rigid Joint Transmission Chain Structures and Flexible Rod Structures [J]. China Mechanical Engineering, 2025, 36(05): 974-985.
[8]	LI Xuyang, DAI Liangcheng, CHI Maoru, ZHAO Minghua, ZHOU Di. Semi-active Control of Rotary Arm Joints with Variable Stiffness for EMU [J]. China Mechanical Engineering, 2025, 36(01): 160-167,176.
[9]	LI Qi, GAO Hong. Design and Test Analysis of Flexible Joint Elastic Components [J]. China Mechanical Engineering, 2024, 35(10): 1815-1823,1844.
[10]	LIU Mandong, PENG Zhenrui. Truss Damage Identification Based on Joint Multiple Reconstructions Autoencoders [J]. China Mechanical Engineering, 2024, 35(05): 840-850.
[11]	YU Haiyan, ZHANG Daixin, CHU Zunkang. Property Evolution of CFRP Laminate Adhesive Joints underHygrothermal Environments [J]. China Mechanical Engineering, 2024, 35(05): 895-903.
[12]	DU Xu, CHANG Zexin, ZHENG Junqiang, REN Pengfei. A Real-time Tool Path Smoothing Algorithm Considering Joint Jerk Constraints [J]. China Mechanical Engineering, 2024, 35(02): 280-286.
[13]	HUANG Yi, HU Yong, FAN Jiayuan, HU Ming, TANG Qiying, Xiong Yingtao. Study on Obstacle Avoidance Control of Concrete Pump Truck Booms Based on Pseudo-distance Method [J]. China Mechanical Engineering, 2023, 34(12): 1495-1503.
[14]	ZHANG Yinan, DING Jianwan. Friction Model of Robot Joints Considering Influences of Temperature [J]. China Mechanical Engineering, 2023, 34(02): 127-134.
[15]	CUI Yupeng, YU Yang, YU Jianxing, LI Zhenmian, . Topology-size-material Joint Optimization Design of Long-pan Unsupported Decks [J]. China Mechanical Engineering, 2022, 33(23): 2879-2887，2897.

Experimental Research on Identification of Dynamic Characteristic Parameters of Rolling Guide's Joint

滚动导轨结合面动态特性参数识别实验研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics