The Development of Transmission Error Dynamic Measurement System Based on Time Grating Displacement Sensors

China Mechanical Engineering ›› 2011, Vol. 22 ›› Issue (10): 1138-1142.

Previous Articles Next Articles

The Development of Transmission Error Dynamic Measurement System Based on Time Grating Displacement Sensors

Peng Donglin1,2;Zheng Yong1;Chen Ziran1;Gao Zhonghua2;Zheng Fangyan2

1.Hefei University of Technology,Hefei,230009

2.Engineering Research Center of Mechanical Testing Technology and Equipment,Ministry of Education,Chongqing University of Technology,Chongqing,400054

Online:2011-05-25 Published:2011-05-31
Supported by:
National Natural Science Foundation of China（No. 50805150，50975304）

基于时栅传感器的传动误差动态测试系统研制

彭东林1,2;郑永1;陈自然1;高忠华2;郑方燕2

1.合肥工业大学,合肥,230009

2.重庆理工大学机械检测技术与装备教育部工程研究中心,重庆,400054

基金资助:
国家自然科学基金资助项目(50805150，50975304)
National Natural Science Foundation of China（No. 50805150，50975304）

Abstract

Abstract:

Optical gratings are applied to traditional transmission error dynamic measurement system as angle detecting sensors, but high-precision optical gratings are expensive and imported restrictedly.In view of this situation, a time grating, the novel displacement sensor of proprietary intellectual property rights, is invented. Absolute displacement signal of time grating is converted into incremental pulse signal with time series models. and the experiment results prove that accuracy of measurement can achieve

0.137% by using sophisticated FMT test transmission error of gear-hobbing machine, so the desired schematic design has been obtained.

Key words:

time grating, transmission error, dynamic measurement, time series

摘要：

传统的传动误差动态测试系统采用光栅作为角度传感器，而高精度光栅价格昂贵且进口受限，针对该情况,采用拥有自主知识产权的时栅位移传感器，通过时间序列模型将时栅由绝对式信号转化为增量式脉冲信号。结合成熟的全微机化齿轮机床精度检测分析系统（FMT系统）对滚齿机进行了传动误差动态测量，准确度达到0.137%，实现了预期目标。

关键词:

时栅, 传动误差, 动态测量, 时间序列

CLC Number:

BANG Dong-Lin-1, 2, ZHENG Yong-1, CHEN Zi-Ran-1, GAO Zhong-Hua-2, ZHENG Fang-Yan-2.

The Development of Transmission Error Dynamic Measurement System Based on Time Grating Displacement Sensors

[J]. China Mechanical Engineering, 2011, 22(10): 1138-1142.

彭东林1, 2, 郑永1, 陈自然1, 高忠华2, 郑方燕2.

基于时栅传感器的传动误差动态测试系统研制

[J]. 中国机械工程, 2011, 22(10): 1138-1142.

[1]	LI Guangjun1, 2, MA Jing1, 2, DUAN Hong1, 2, HU Xiwen1, 2, XU Lei1, 2, MAO Shimin3, PENG Xianlong4. Numerical Rolling Tests of Actual Measured Tooth Surfaces for Oversized Face Gears [J]. China Mechanical Engineering, 2025, 36(05): 1008-1017.
[2]	XU Lixin, XIA Chen, YANG Bo. Analysis and Test on Dynamic Transmission Errors of RV Reducers under Load Conditions [J]. China Mechanical Engineering, 2023, 34(18): 2143-2152.
[3]	LI Yan, WANG Zhonghou, LIU Lei, DIAO Xinwei, WANG Xuejun. Effects of Tooth Surfaces of Topographic Profile Errors in Double-sided Grinding on Gear Transmission by Forming Method [J]. China Mechanical Engineering, 2022, 33(14): 1661-1669,1679.
[4]	PENG Donglin, SHI Zhaoyao, ZHENG Yong, ZHOU Qiwu, YANG Jisen, XU shi. Research on Complete Set Technology of Ultra-precision Worm Gear Pair [J]. China Mechanical Engineering, 2022, 33(09): 1051-1056.
[5]	. Quasi-Hertz Loaded Tooth Contact Analysis of Gears Based on Ease-off Surface Topology [J]. China Mechanical Engineering, 2021, 32(18): 2174-2180.
[6]	ZHANG Bo;WEI Bingyang;LIU Dake. Construction and Analysis of Spiral Bevel Gear Ease-off Surfaces Based on Common Tangent Conjugation [J]. China Mechanical Engineering, 2020, 31(04): 459-464.
[7]	BAI Yali1;ZHANG Yi1;JI Min2;LIU Wenqiang3. Reliability Analyses of Gear Transmission Errors of Steering Mechanism of Gun Using MDCRSA [J]. China Mechanical Engineering, 2017, 28(13): 1593-1600.
[8]	LEI Xianqing, MENG Qi, MA Wensuo, YANG Kelin. Research on Transmission Errors of Closed Loop Gear Transmission Systems [J]. China Mechanical Engineering, 2017, 28(06): 675-682.
[9]	Lei Xianqing, Cai Zhenhua, Zhang Mingzhu, Ma Wensuo. Analyses of Transmission Error of Mechanical Shift Gear in HMCVT [J]. China Mechanical Engineering, 2015, 26(23): 3253-3259.
[10]	Yang Hongtao, Fang Chuanzhi, Fei Yetai, . Dynamic Measurement Error Decomposition and Reconstruction Method Based on ICA [J]. China Mechanical Engineering, 2014, 25(19): 2592-2596,2602.
[11]	Lei Duncai, Tang Jinyuan. A Calculation Method of Mesh Stiffness for Face Gear Transmission System [J]. China Mechanical Engineering, 2014, 25(17): 2300-2304.
[12]	ZHANG Jing-1, CHEN Bing-Kui-1, TUN Chang-Hong-2, LI Chao-Yang-1, 3. Analysis of Effect of Taper Roller Bearing Preload on Gear Whine in Manual Transmission [J]. China Mechanical Engineering, 2013, 24(11): 1453-1458.
[13]	DING Guo-Beng, ZHOU Jie-De, HU Ye-Fa. FBG Based Air-gap Magnetic Flux Density Dynamic Measurement and Analysis [J]. China Mechanical Engineering, 2011, 22(22): 2677-2681.
[14]	ZHENG Yong, BANG Dong-Lin, WANG Xian-Quan, YANG Ji-Sen, CHEN Zi-Ran. Principles and Precision Verification of Synthetic Parameter Examination Instrument for New Type Worm Gear Pair [J]. China Mechanical Engineering, 2010, 21(24): 2989-2994.
[15]	XU Kai, DENG Xiao-Zhong, LIU Geng, YANG Jian-Jun, SU Jian-Xin. Transmission Error Calculation and Noise Experiment on Planetary Gear Trains with Straight Profile Internal Gear [J]. China Mechanical Engineering, 2010, 21(1): 76-79.

The Development of Transmission Error Dynamic Measurement System Based on Time Grating Displacement Sensors

基于时栅传感器的传动误差动态测试系统研制

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics