Study on Compiling Method of Torque Load Spectrum of Fatigue Tests for Loader Driving Axles

Abstract

Abstract: To simulate the loader driving axle fatigue tests more realistic loader actual operation situations， a torque load spectrum compiling method of fatigue tests for loader driving axles was researched.In the compiling processes of the torque load spectrums， the loading method of former transmission shaft forword and reverse was proposed according to the actual torque characteristics of the loader driving axles.Subsequently the levels of load spectrum， the load threshold and the rotational speed of fatigue tests were determined.The results show that the equivalent effects of the theoretical treatment by the loading method of former transmission shaft forword and reverse are consistent with the actual operations of the loader， which may reduce fatigue test difficulties largely.The selection method of rotational speeds for the former transmission shafts in the fatigue tests may get the fatigue tests more realistic to simulate the actual operation of the loader.Loading an intensified fatigue test load spectrum of 11.4 h is equivalent to the actual operation of the loader for 609.2 h， which means that the fatigue test processes of driving axles are accelerated greatly.

Key words: loader driving axle, former transmission shaft, fatigue test, load spectrum

摘要： 为了使装载机驱动桥疲劳试验更加真实地反映装载机实际作业情况，研究了装载机驱动桥疲劳试验扭矩加载谱的编制方法。在扭矩加载谱的编制过程中，根据装载机驱动桥实际扭矩特性，提出了驱动桥疲劳试验时前传动轴正反转加载的方法，确定了前传动轴载荷谱的分级数、载荷循环阈值和疲劳试验时的转速。结果表明：依据前传动轴正反转加载的方法处理的等效效果与装载机实际作业情况相一致，很大程度地降低疲劳试验难度；疲劳试验时前传动轴转速的选择方法可使疲劳试验更加真实地模拟装载机实际作业情况；加载一个强化疲劳试验加载谱块需11.4 h，相当于装载机实际作业609.2 h，明显加快了驱动桥疲劳试验的进程。

关键词: 装载机驱动桥, 前传动轴, 疲劳试验, 加载谱

CLC Number:

TH243.1

LIANG Jia;SONG Xuding;HUANG Zhu'an;YU Luping;LYU Pengmin. Study on Compiling Method of Torque Load Spectrum of Fatigue Tests for Loader Driving Axles[J]. China Mechanical Engineering.

梁佳;宋绪丁;黄柱安;郁录平;吕彭民. 装载机驱动桥疲劳试验扭矩加载谱编制方法研究[J]. 中国机械工程.

References

[1]沈永峰，郑松林，王治瑞，等.某型轿车摆臂程序载荷谱编制研究[J].中国机械工程，2013，24（14）：1974-1978.
SHEN Yongfeng，ZHENG Songlin，WANG Zhirui，et al.Research on Compilation of Automotive Swing Arm Program Spectrum[J].China Mechanical Engineering，2013，24（14）：1974-1978.
[2]WANG Jixin，HU Jiyong，YAO Mingyao，et al.Time Domain Characteristics Analysis of Load Spectrum of Axle Shaft[C]//IEEE International Conference on Information and Automation.Harbin，2010：2061-2064.
[3]ZHAO Wenli，SUN Mingliang，WANG Hui，et al.Vehicle Response Calculation Under the Action of Random Road Spectrum and Fatigue Life Prediction of the Drive Axle Housing[J].Advanced Science Letters， 2012，12（1）：95-99.
[4]WANG Jixin，WANG Naixiang，YU Xiangjun，et al.A Method for Compiling Load Spectrum of Transmission System of Wheel Loader[J].Advanced Materials Research，2010，108/111：1314-1319.
[5]WANG Jixin，Hu Jiyong，YANG Yonghai，et al.Method of Testing and Data Processing of Random Load Spectrum of Wheel Loader Transmission[J].Key Engineering Materials，2011，460/461：252-257.
[6]侯晓婷.轮式装载机半轴载荷谱测试及疲劳寿命预测研究[D].长春：吉林大学，2009.
HOU Xiaoting.Study on the Load Spectrum Test and Fatigue Life Estimation of Wheel Loader Axle Shaft[D].Changchun：Jilin University，2009.
[7]XU Zhiqiang，WANG Hongjian，YAO Mingyao.Load Spectrum Compilation Based on Nonparametric Statistical Extrapolation[J].Advanced Materials Research， 2013，694/697：271-277.
[8]宫海彬，苏建，王兴宇，等.基于极值外推的高速列车齿轮传动装置载荷谱编制[J].吉林大学学报（工学版），2014，44（5）：1264-1269.
GONG Haibin，SU Jian，WANG Xingyu，et al.Compiling Method of Load Spectrum of High-speed Train Gear Drive System Base on Extreme Value Extrapolation[J].Journal of Jilin University，2014，44（5）：1264-1269.
[9]张英爽，王国强，王继新，等.工程车辆传动系载荷谱的编制方法[J].农业工程学报，2011，27（4）：179-183.
ZHANG Yingshuang，WANG Guoqiang，WANG Jixin， et al.Compilation Method of Power Train Load Spectrum of Engineering Vehicle[J].Transactions of the Chinese Society of Agricultural Engineering，2011，27（4）：179-183.
[10]郁录平.工程机械底盘设计[M].北京：人民交通出版社，2004.
YU Luping.Design of Construction Machinery Chassis[M].Beijing:China Communications Press，2004.
[11]贾海波.轮式装载机传动系载荷谱测试与编制方法研究[D].长春：吉林大学，2009.
JIA Haibo.Study on the Stand Generation Methods about Load Spectrum of Wheel Loader Driveline[D].Changchun：Jilin University，2009.
[12]赵少汴，王忠保.抗疲劳设计——方法与数据[M].北京：机械工业出版社，1997.
ZHAO Shaobian，WANG Zhongbao.Anti-fatigue Design—Methods and Data[M].Beijing：Machinery Industry Press，1997.
[13]唐东红，崔玉莲，张炳喜，等.装甲车辆侧减速器齿轮接触疲劳寿命预测研究[J].中国机械工程， 2011，22（22）：2762-2765.
TANG Donghong，CUI Yulian，ZHANG Bingxi，et al.Research on Gear's Contacting Fatigue Life Prediction of Side Reducer in Armored Vehicle[J].China Mechanical Engineering，2011，22（22）：2762-2765.
[14]刘永臣，常绿，孙丽.轮式装载机传动系载荷谱编制方法研究[J].中国机械工程， 2012， 23（12）：1412-1416.
LIU Yongchen，CHANG Lü，SUN Li.A Method of Compiling Load Spectrum on Wheel Loader Transmission[J].China Mechanical Engineering，2012，23（12）：1412-1416.

[1]	Lingyun YAO, Zhishun YANG, Li LI, Yongjie LIN. Research on Load Spectrum Editing Based on Optimal Pseudo Wigner-Ville Distribution Method [J]. China Mechanical Engineering, 2025, 36(11): 2501-2508.
[2]	LI Peng1, 2, 3, 4, WANG Yitang1, 4, WANG Jiaqian2, 3, ZHOU Peiquan2, 3, YANG Liangliang1, 4, SONG Xueguan1, 4, ZHENG Yuebin5, 6. Data-driven Fatigue Load Spectrum Compiling of Concrete Pump Truck Booms#br# [J]. China Mechanical Engineering, 2024, 35(10): 1881-1889.
[3]	ZENG Weihe, GOU Ligang, WANG Mingqing, WANG Lei, YU Ronggui. Fatigue Analysis and Experimental Study of Aluminum Alloy No-rivet Clinch Connections Based on Equivalent Structural Stress Method [J]. China Mechanical Engineering, 2024, 35(06): 1129-1139.
[4]	YAO Lingyun, LIN Yongjie, LI Li, . Accelerated Editing of Automotive Component Load Spectrum Based on S-transform Dual Threshold Method [J]. China Mechanical Engineering, 2024, 35(02): 215-220.
[5]	MAO Tianyu, LIU Huaiju, WANG Baobin, HOU Shengwen, CHEN Difa. Analysis of Gear Bending Fatigue Test Based on Hierarchical Bayesian Model [J]. China Mechanical Engineering, 2021, 32(24): 3008-3015，3023.
[6]	CHEN Kuanyu, YANG Guangwu, XIAO Shoune, WANG Jujin. Research on Mounting Life of Subway Supports Based on Damage Association Editing Method [J]. China Mechanical Engineering, 2021, 32(04): 460-466.
[7]	ZHENG Guofeng1,2；ZHU Hongguo1；WU Chenbo1；XIAO Pan1,2. Study on Extrapolation Method of Load Spectrum with Extremum Exceedances Subjected to GPD [J]. China Mechanical Engineering, 2020, 31(18): 2262-2267.
[8]	DONG Guojiang1;HAN Jie1;YAN Feng1;LANG Yuling2. Research on Load Spectrum Accelerated Editing Method for Fatigue Test of Vehicle Parts [J]. China Mechanical Engineering, 2020, 31(05): 543-552.
[9]	LIU Jun1;ZHANG Haijian1;WANG Wei1;LIU Yajun1;ZHOU Fugeng2. Fatigue Analysis of Commercial Vehicle Frames Based on Six-dimensional Wheel Loads [J]. China Mechanical Engineering, 2019, 30(21): 2583-2589.
[10]	QI Guangfeng1;ZHAO Hui1;XIAO Xiaohui1;XU Hongyan2;LI Hongmei2. Numerical Simulation of Dynamic Stress and Analysis of Fatigue Load Characteristics for High-speed Railway Catenary Droppers [J]. China Mechanical Engineering, 2018, 29(09): 1063-1068.
[11]	FU Cheng;ZHANG Fanghui. Loading Design of Wind Turbine Blade Fatigue Tests [J]. China Mechanical Engineering, 2018, 29(06): 743-747.
[12]	ZHENG Songlin1,2;WANG Shuo1;FENG Jinzhi1,2;CHEN Tie1;YU Jiawei1. Load Spectrum Compilation of Damper Durability Tests Based on Multi-axial Loads [J]. China Mechanical Engineering, 2017, 28(21): 2547-2552.
[13]	WAN Yipin1;SONG Xuding1;YUAN Zhengwen2;YU Luping1. Compilation Method of Fatigue Experimental Load Spectrum of Loader Working Devices [J]. China Mechanical Engineering, 2017, 28(15): 1806-1811.
[14]	Kou Hongbin, Qiu Rongying, Zhu Jianfeng. Study on Fatigue Property of Auto Seam Welded Thin-sheet Structures [J]. China Mechanical Engineering, 2014, 25(15): 2107-2111.
[15]	CHEN Yong-Feng-1, 3, ZHENG Song-Lin-1, WANG Chi-Rui-1, MA Za-Gen-2, HU Wen-Wei-2. Research on Compilation of Automotive Swing Arm Program Spectrum [J]. China Mechanical Engineering, 2013, 24(14): 1974-1978.