Study on Stamping Formability of Third Generation HSS QP980 for Vehicle Car Body Applications

Abstract

Abstract:

QP steel is a kind of the third generation HSS with high strength and high plasticity. In order to find out QP980 stamping forming ability, the FEM analysis combined with physical tooling validation was applied. Then comparison with the other four kinds of high strength steel(CR340,DP600,DP800 and DP1000) was made. It is found that QP980 has higher strength than that of DP1000 and with better formability than that of DP600. Applications of the third generation QP steel can solve the issues of complicated shape parts with high strength, for car safety and lightweight it has great application values.

Key words: third generation high strength steel(HSS);QP980;experimental die;forming , ability

摘要：

QP钢是一种高强度高塑性的第三代高强度钢,为了论证QP980的冲压成形能力,采用虚拟成形分析和冲压实验相结合的方法研究了汽车用第三代高强度钢板QP980的冲压成形性,并与汽车常用的CR340、DP600、DP800、DP1000四种高强度钢板进行了对比研究，研究结果证明QP980的强度略高于DP1000的强度,冲压成形性则是QP980比DP600略好。应用第三代QP钢可解决高强度且形状较复杂的零件成形问题,在汽车安全性和轻量化研究中QP980可发挥重要作用。

关键词: 第三代高强度钢, QP980, 实验模, 成形能力

CLC Number:

TG386.41

Zheng Debing, Liu Yifan, Wu Chunming, Yu Huanqing. Study on Stamping Formability of Third Generation HSS QP980 for Vehicle Car Body Applications [J]. China Mechanical Engineering, 2014, 25(20): 2810-2813.

郑德兵, 柳一凡, 吴纯明, 余欢庆. 汽车用第三代高强度钢QP980冲压成形性研究[J]. 中国机械工程, 2014, 25(20): 2810-2813.

[1]	SUN Dong-Shu, HU Feng-Bin, QIN Da-Tong, LIU Zhen-Jun. An Experimental Analysis on Thermal Stress Distributions in a Multiple Disc Wet Brake [J]. J4, 201016, 21(16): 2006-2010.
[2]	DIAO Wei, WANG Zhi-Yuan, ZHOU Zhi-Li. Simulation Research on Truck Braking Stability on Turn of an Continuous Downgrade [J]. J4, 201016, 21(16): 2010-2015.
[3]	WU Jianpeng, DING Ao, MA Biao, LI Heyan, WANG Liyong, YANG Chengbing. Failure Probability Analysis of Temperature Field in Wet Friction Components Based on Macro-Micro Frictional Contact Model [J]. China Mechanical Engineering, 2026, 37(1): 40-50.
[4]	Liyun HAN, Xueping LI, Xiangkai MENG, Yangyang LIANG, Lihao ZHANG, Xudong PENG. Study on Dynamics Characteristics of Porous Matrix Hydrodynamic and Hydrostatic Mechanical Seals [J]. China Mechanical Engineering, 2025, 36(11): 2544-2553.
[5]	Yang LI, Hongyu WEI. Optimization and Experiments of Flow-guiding Structure of Cathode in Electrochemical Machining of Internal Splines [J]. China Mechanical Engineering, 2025, 36(11): 2658-2664.
[6]	Xinyou LIN, Zhongwei JIN, Yunliang TANG. Vehicle Lateral Control Strategy Integrating Road Curvature Feedforward [J]. China Mechanical Engineering, 2025, 36(11): 2774-2782.
[7]	Weiwei LIU, Kuo LI, Xi YU, Shuangquan TANG. Research on First-passage failure and Reliability Analysis of Maglev Trains [J]. China Mechanical Engineering, 2025, 36(10): 2232-2240.
[8]	Pengpeng ZHI, Xueqin LIU, Yi GUAN, Jiang WU, Zhonglai WANG. AMESim-PID-Kriging-based Reliability Analysis Method for Air-fuel Ratio Control of General Aviation Engines [J]. China Mechanical Engineering, 2025, 36(10): 2433-2443.
[9]	Hongyu GE, Zhan ZHAO, Anxiang GUO, Jiarui SUN. Fault Diagnosability Evaluation of Meta Actuation Units Based on SABO-VMD [J]. China Mechanical Engineering, 2025, 36(08): 1774-1783.
[10]	TIAN Hailong1, 2, SUN Yuzhi1, 2, YANG Zhaojun1, 2, LIU Zhifeng1, 2, CHEN Chuanhai1, 2, HE Jialong1, 2. Research Status and Development Trends of Failure Modes, Effects, and Criticality Analysis for CNC Machine Tool Reliability [J]. China Mechanical Engineering, 2025, 36(07): 1430-1441.
[11]	YIN Xizhi1, 2, 3, HU Sanbao1, 2, 3, FENG Zhiyong1, 2, 3. Vehicle Yaw and Roll Stability Control Based on Dynamic Output Feedback [J]. China Mechanical Engineering, 2025, 36(07): 1453-1462.
[12]	WANG Zhichao1, LIU Chao1, RAN Yan2, CHEN Yifan3, JIANG Dongxiang1, ZHANG Genbao2, 3. A Reliability Allocation Method Considering Distribution and Transmission Models for Mechanical Systems [J]. China Mechanical Engineering, 2025, 36(06): 1143-1150.
[13]	JIA Cunde1, 2, 3, KONG Xiangdong1, 2, 3, LI Shaoguang1, 2, 3, LI Junfei4, ZHANG Junyong1, 2, 3, FENG Junxue5, AI Chao1, 2, 3, JIANG Wenguang1, 2, 3. Research on Double Layer Sliding Mode Control of Large Scale Discrete Systems under High Frequency Time Varying Loads [J]. China Mechanical Engineering, 2025, 36(05): 911-922.
[14]	DU Bing1, 2, LI Yang1, 2, LIU Fenghua1, 2, DONG Mingxin1, 2, WAN Yufan1, 2, ZHONG Qingshuai1, 2. Establishment and Influences of Critical Wrinkling Criterion of Sheet Metals Considering Thickness Stress [J]. China Mechanical Engineering, 2025, 36(05): 1074-1082.
[15]	KAN Xiaobo1, ZHAO Youqun1, LI Danyang1, LIN Fen1, HE Kunpeng1, 2, YOU Qingshen2. Multi-objective Torque Coordination Control for Distributed Drive Electric Vehicles Based on Nonlinear MPC [J]. China Mechanical Engineering, 2025, 36(05): 1123-1131.

Study on Stamping Formability of Third Generation HSS QP980 for Vehicle Car Body Applications

汽车用第三代高强度钢QP980冲压成形性研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics