Analysis on Aerodynamic Noise Characteristics of Multi-blade Centrifugal

China Mechanical Engineering ›› 2014, Vol. 25 ›› Issue (19): 2658-2664.

Previous Articles Next Articles

Analysis on Aerodynamic Noise Characteristics of Multi-blade Centrifugal

Xie Chao1;Gu Zhengqi1,2;Yang Zhendong1;Yang Xiaotao1;Zong Yiqi1;Luo Zemin1

1.State Key Laboratory of Advanced Design and Manufacture for Vehicle Body of Hunan University,Changsha,410082
2.Hunan University of Technology,Zhuzhou,Hunan,412007

Online:2014-10-10 Published:2014-10-14
Supported by:
National Natural Science Foundation of China（No. 50975083）;Hunan Provincial Key Technology R&D Program（No. 2009JT1014）

基于流固耦合的汽车空调多翼离心通风机气动声学特性分析

谢超1;谷正气1,2;杨振东1;杨晓涛1;宗轶琦1;罗泽敏1

1.湖南大学汽车车身先进设计制造国家重点实验室,长沙,410082
2. 湖南工业大学,株洲,412007

基金资助:
国家自然科学基金资助项目（50975083）；湖南省科技攻关计划重点项目（2009JT1014）；长江学者与创新团队发展计划资助项目（531105050037）；湖南大学汽车车身先进设计制造国家重点实验室自主课题(61075001)

Abstract

Abstract:

Created a simple geometric model, two-way fluid-structure interaction calculation was more accurate though experimental verification. Then, multi-blade centrifugal fan of a vehicle air conditioning system was taken as an research object, effects of the volute FSI on the fan aerodynamic noise were analyzed. Flow field calculation was carried out using CFX software and structure calculation was carried out using ANSYS software, respectively. Based on MFX-ANSYS/CFX data coupling platform, two-way synchronization solution method was used to solve the ventilator airflow field and the response of volute structure. The results show that, FSI effects enhance the flow field pressure pulsation; after considering FSI effects,the sound power level of the centrifugal fan impeller outlet and volute airway surface increases significantly, and the noise value of the fan outlet increases 5.24dB.

Key words: centrifugal fan, fluid-structure interaction(FSI);aerodynamic noise, numerical calculation

摘要：

建立了一个简单几何模型,通过试验验证得出双向流固耦合计算比非耦合计算准确性更高的结论。以某汽车空调系统的多翼离心通风机为研究对象,分析了蜗壳流固耦合作用对通风机气动噪声的影响。利用CFX和ANSYS软件分别进行流场和结构计算。以MFX-ANSYS/CFX为数据耦合平台,采用双向同步求解的方法,对通风机内流场和蜗壳结构响应进行联合求解,并将耦合计算结果与非耦合计算结果进行对比。结果表明,流固耦合作用使得流场压力脉动增强;在考虑流固耦合作用影响后,离心通风机叶轮出口处及蜗壳气道内表面的声功率级明显增大,通风机出口处的气动噪声值增大了5.24dB。

关键词: 离心通风机, 流固耦合, 气动噪声, 数值计算

CLC Number:

U270.2

Xie Chao, Gu Zhengqi, Yang Zhendong, Yang Xiaotao, Zong Yiqi, Luo Zemin. Analysis on Aerodynamic Noise Characteristics of Multi-blade Centrifugal[J]. China Mechanical Engineering, 2014, 25(19): 2658-2664.

谢超, 谷正气, 杨振东, 杨晓涛, 宗轶琦, 罗泽敏. 基于流固耦合的汽车空调多翼离心通风机气动声学特性分析[J]. 中国机械工程, 2014, 25(19): 2658-2664.

References

[1]颜建容，谷正气，李伟平，等. 汽车空调前向多翼离心通风机气动声学特性分析与优化[J]. 汽车工程，2010, 32(6):540-546.
Yan Jianrong,Gu Zhengqi, Li Weiping, et al. Analysis and Optimization on the Aerodynamic Acoustic Characteristics of Forward-curved-multi-Blade Centrifugal Fan in Vehicle Air Conditioner[J]. Automotive Engineering, 2010, 32(6):540-546.
[2]邢景棠，周盛，崔尔杰. 流固耦合力学概述[J]. 力学进展，1997,27(1):19-37.
Xing Jingtang, Zhou Sheng, Cui Erjie. Overview of the Fluid-structure Interaction Mechanics[J].Advances in Mechanics, 1997, 27(1):19-37.
[3]杨立国.北京地铁轴流风机内流场及叶片气动弹性的数值模拟研究[D].北京:北京交通大学，2007.
[4]陶海亮，朱阳历，郭宝亭，等．压气机叶片流固耦合数值计算[J].航空动力学报，2012，27(5)：1054-1060.
Tao Hailiang，Zhu Yangli，Guo Baoting, et al. Numerical Simulation of Aeroelastic Response in Compressor Based on Fluid-structure Coupling[J]. Journal of Aerospace Power，2012，27(5)：1054-1060.
[5]裴吉，袁寿其，袁建平．流固耦合作用对离心泵内部流场影响的数值计算[J].农业机械学报，2009，40(12)：107-112.
Pei Ji, Yuan Shouqi, Yuan Jianping. Numerical Calculation for Effect of Fluid-structure Interaction on Flow Field in Centrifugal Pump[J]．Transactions of the Chinese Society for Agricultural Machinery，2009，40(12)：107-112.
[6]Kato C, Yamade Y,Wang Hong, et al. Prediction of the Noise from a Multi-stage Centrifugal Pump[C]//ASME Fluids Engineering Division Summer Meeting. Houston,2005:1273-1280.
[7]王松岭，孙哲，吴正人，等．基于流固耦合的离心通风机叶轮强度研究[J].华北电力大学学报，2011，38(4)：81-85.
Wang Songling, Sun Zhe, Wu Zhengren,et al. Strength Investigation of the Centrifugal Fan Impeller Based on Fluid-structure Coupling[J]. Journal of North China Electric Power University，2011，38(4)：81-85.
[8]谷正气．汽车空气动力学[M]．北京：人民交通出版社，2005.
[9]成心徳. 离心通风机[M]. 北京：化学工业出版社，2007.

[1]	NIU Wenchao, SUN Zhaoyang, SHENG Zhongqi, YU Jiancheng, ZHAO Baode, ZHAO Wentao, . Study on Influencing Factors of Stress at Roots of Autonomous Sailboat Wing Sail Mast and Its Influencing Laws [J]. China Mechanical Engineering, 2023, 34(22): 2647-2658.
[2]	QU Xiaozhang, ZHANG Jiabei, ZHAI Fangzhi. Sensitivity Analysis and Optimization of High Speed Train Cooling Centrifugal Fan Performance [J]. China Mechanical Engineering, 2023, 34(20): 2504-2512.
[3]	LIU Heng, WANG Zhineng, BIN Guangfu, LIN Weiming, LIN Yaochen, MA Yanxiang. Theoretical Wrinkling Modeling and Critical Forming Radius Analysis of Aviation Tube Bending Forming Considering Circumferential Waveform Characteristics [J]. China Mechanical Engineering, 2023, 34(16): 1982-1990.
[4]	LI Junliang;WANG Shilong;WANG Sibao;XIA Changjiu. Energy Consumption Model of Hobbing Machine Tools Based on Workpiece Material Removal Rate [J]. China Mechanical Engineering, 2020, 31(21): 2626-2631.
[5]	CAI Jiancheng;E Shiju;JIANG Yonghua;JIAO Weidong;WANG Dongyun. Experimental Study of Vibrations, Noises and Pressure Fluctuations of Centrifugal Fan [J]. China Mechanical Engineering, 2019, 30(10): 1188-1194,1206.
[6]	TANG Xinzi;XIAO Peng;CAI Peng;PENG Ruitao. Multi-objective Optimization Design of Small-centrifugal Compressor under Variable Flow Conditions [J]. China Mechanical Engineering, 2018, 29(16): 1975-1983.
[7]	XING Shikai, LI Juxia, MA Chaochen, CHEN Lihui, LI Qing. Optimal Design for Regulating Mechanisms of Variable Radial Turbocharger [J]. China Mechanical Engineering, 2017, 28(02): 139-143,149.
[8]	Xu Hongbin, Hu Jianjun, Zhang Weiqing, Ling Wenkai. Profile Accuracy Control Method of Straight Bevel Gear by Near Net Shape Process Based on Numerical Calculation [J]. China Mechanical Engineering, 2014, 25(17): 2386-2390.
[9]	WANG Yan-An, WEN Gui-Lin, CHEN Zhi-Fu, WANG Meng. A Multipole Galerkin Boundary Element Method for Two Dimensional Half Space Acoustic Problems [J]. China Mechanical Engineering, 2013, 24(15): 2066-2071.
[10]	LV Jian-Gang, GAO Fei, BAI Xiang-Hua, LI Pan-Lu. #br# Simulation Analysis and Experimental Research on Movements of Biomimetic Propulsion Unit Based on Basilisk Lizard [J]. China Mechanical Engineering, 2013, 24(15): 2048-2052,2059.
[11]	LIU Qiang-Ling. Study on Deflection of a Variable Cross Sectional Flexible Component under Arbitrary Loads [J]. China Mechanical Engineering, 2013, 24(10): 1381-1384.
[12]	CA An-Jiang, ZHANG Zhen-Jun, RUAN Xiao-Guang. Pressure Angle Values Based on Shaving Modification Terms [J]. China Mechanical Engineering, 2013, 24(10): 1327-1330.
[13]	MA Wei-Jin-1, LI Feng-Lan-2, WANG Dun-Yuan-1, XIONG Shi-Bei-2. Modelling and Validation of Vertical Vibration with 6 Degrees of Freedom for 4-high Hot Strip Mill Stand [J]. China Mechanical Engineering, 2011, 22(24): 2962-2965.
[14]	LI Wei-Wei, CHEN Xiao-Yang, CHEN Xue-Jin. Numerical Calculation and Roller Pressure Analysis of Theoretical Logarithm Profile Equation [J]. China Mechanical Engineering, 2011, 22(15): 1788-1792.
[15]	Zhang Kunpeng;Ding Qian. Vibration Analysis of a Two-disc Rotor-stator System with Axial Rubs [J]. J4, 2009, 20(21): 0-2627.

Analysis on Aerodynamic Noise Characteristics of Multi-blade Centrifugal

基于流固耦合的汽车空调多翼离心通风机气动声学特性分析

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics