A Novel Technology for Micro-fluid Dispensing Based on Two-phase Flow Dynamics

Abstract

Abstract:

According to driving principle, a micro-fluid dispensing technology can be sorted out to be the indirect driving and direct driving technologies. The common dispensing technologies used the indirect driving principle to realize the kinetic energy transferring from the movable medium to the stable liquid and spray the liquid droplets out of the nozzle to the substrate. The novel dispensing technology was presented first due to the direct driving principle, which was based on the two-phase flow dynamics. With a proper gas-liquid flow rate ratio, the gas and liquid streams entered the micro-mixing chamber simultaneously to form the stable slug flow, which contained the bubbles and droplets in a uniform interval and a consistent volume, respectively.

Key words: manufacturing system, micro-fluid dispensing technology, direct driving principle, two-phase flow dynamics

摘要：

根据驱动原理将非接触式微流体分配技术分为间接驱动和直接驱动。现有技术采用间接驱动原理，通过驱动介质与静止流体的动能交换实现流体的运动，完成分配过程。新技术采用直接驱动原理，根据气液两相流理论，将气体和液体射流同时引入混合腔，在一定的气液流速比范围内，气体和液体射流自发在混合腔内形成气液两相断塞流，可获得均匀间隔、流型稳定的液滴和气泡，气液两相均具有体积一致的特点，可实现不同黏度液体的高频率、微体积的精确分配。

关键词: 制造系统, 微流体分配技术, 直接驱动原理;双流体动力学

CLC Number:

TH16

Zhang Jinsong, Wang Zhiliang, Zhang Jianhua. A Novel Technology for Micro-fluid Dispensing Based on Two-phase Flow Dynamics[J]. China Mechanical Engineering, 2014, 25(1): 76-81.

张金松, 王志亮, 张建华. 基于双流体动力学的微流体分配新技术[J]. 中国机械工程, 2014, 25(1): 76-81.

References

[1]Li Jianping，Deng Guiling. Technology Development and Basic Theory Study of Fluid Dispensing - a Review[C]//2004 High Density Microsystem Design and Packaging and Component Failure Analysis. Shanghai， 2009：198-205.
[2]邓圭玲，王军权，谢敬华，等. 一种基于电磁斥力的液体喷射器：中国，200820053102.X[P]. 2009-01-28.
[3]邓圭玲，王军泉，谢敬华，等. 一种基于电磁吸力驱动的液体喷射器：中国，201220197Y[P]. 2009-04-15.
[4]Nordson Corporation. DJ-9500 DispenseJet. CA: Nordson ASYMTEK，(2010-02-16). http://www.nordson.com/en-us/divisions/asymtek/Literature/Jets%20Pumps%20Valves/DS-DJ-9500-NordsonASYMTEK.pdf.
[5]张鸿海，刘华勇，舒霞云，等. 一种高黏度流体微量喷射点胶装置：中国，200710168669.1[P]. 2008-06-04.
[6]Jia Haili，Hua Zikai，Li Maoyu，et al. A Jetting System for Chip on Glass Packaging[C]//2009 International Confidence on Electronic Packaging and High Density Packaging. Beijing，2009：954-960.
[7]彭鹏，贾海立，张金松，等. 高压气体驱动的液体喷射器：中国，201020687761.6[P]. 2010-12-30.
[8]Ge Zhiqi，Deng Guiling. Design and Modeling of Jet Dispenser Based on Giant Magnetostrictive Material[C]//2009 International Conference on Electronic Packaging Technology & High Density Packaging. Beijing，2009：974-979.
[9]段吉安，邓圭玲，葛志旗，等. 一种基于超磁致伸缩棒驱动的点胶阀：中国，201010127672[P]. 2010-03-19.
[10]邓圭玲，王军泉，谢敬华，等. 一种超磁致伸缩驱动液体喷射器：中国，200810031314.2[P]. 2008-09-24.
[11]Nguyen Q H，Han Y M，Choi S B，et al. Design of a New Mechanism for Jetting Dispenser Featuring Pizeoactuator[J]. Mechanical Engineering Science，2008，222 (4)：711-721.
[12]Nguyen Q H，Choi M K，Choi S B. A New Type of Piezostack-driven Jetting Dispenser for Semiconductor Electronic Packaging：Modeling and Control[J]. Smart Materials and Structures，2008，17(1)：1-13.
[13]刘华勇. 高黏度流体微量喷射与控制技术研究[D]. 武汉：华中科技大学, 2007.
[14]Xie Dan，Zhang Honghai，Shu Xiayun，et al. Multi-materials Drop-on-demand Inkjet Technology Based on Pneumatic Diaphragm Actuator[J]. Science China，2010，53(6)：1605-1611.
[15]张鸿海，舒霞云，肖俊峰，等. 一种气动膜片式微滴喷射方法及装置：中国，200910305515[P]. 2009-08-11.
[16]舒霞云. 气动膜片式金属微滴喷射理论与实验研究[D]. 武汉：华中科技大学，2009.
[17]Musashi Engineering Inc. MJET-A-HU*-R/L. Tokyo : Musashi，[2012-10-15]. http://www.musashi-engineering.co.jp.e.cn.hp.transer.com/products/100_3-1-2-8.html.
[18]Gupta R，Fletcher D F，Haynes B S. Taylor Flow in Microchannels：a Review of Experimental and Computational Work[J]. Journal of Computational Multiphase Flows，2010，2(1)：1-31.
[19]Triplett K A，Ghiaasiaan S M，Abdel-Khalik S I，et al. Gas-liquid Two-phase Flow in Microchannels：Part 1-Two-phase Flow Patterns[J]. International Journal of Multiphase Flow，1999，25(3)：377-394.
[20]Serizawa A，Feng Z P，Kawara Z. Two-phase Flow in Microchannels[J]. Experimental Thermal and Fluid Science，2002，26(6/7)：703-714.
[21]Pamitran A S，Choi K，Oh J T，et al. Characteristics of Two-phase Flow Pattern Transitions and Pressure Drop of Five Refrigerants in Horizontal Circular Small Tubes[J]. International Journal of Refrigeration，2010，33(3)：578-588.
[22]Yue Jun，Luo Lingai，Gonthier Yves，et al. An Experimental Study of Air-water Taylor Flow and Mass Transfer Inside Square Microchannels[J]. Chemical Engineering Science，2009，64 (16)：3697-3708.
[23]Saisorn S，Wongwises S. Flow Pattern，Void Fraction and Pressure Drop of Two-phase Air-water Flow in a Horizontal Circular Micro-channel[J]. Experimental Thermal and Fluid Science，2008，32 (3)：748-760.
[24]Agostini B，Revellin R，Thome J R. Elongated Bubbles in Microchannels：Part I - Experimental Study and Modeling of Elongated Bubble Velocity[J]. International Journal of Multiphase Flow，2008，34 (6)：590-601.
[25]Saisorn S，Wongwises S. An Experimental Investigation of Two-phase Air-water Flow through a Horizontal Circular Micro-channel[J]. Experimental Thermal and Fluid Science，2009，33(2)：306-315.
[26]Choi C W，Yu D I，Kim M H. Adiabatic Two-phase Flow in Rectangular Microchannels with Different Aspect Ratios：Part II-Bubble Behaviors and Pressure Drop in Single Bubble[J]. International Journal of Heat and Mass Transfer，2010，53 (23/24)：5242-5249.
[27]Elcock D，Honkanen M，Kuo C，et al. Bubble Dynamics and Interactions with a Pair of Micro Pillars in Tandem[J]. International Journal of Multiphase Flow，2011，37(5)：440-452.
[28]Zhao T S，Bi Q C. Co-current Air-water Two-phase Flow Patterns in Vertical Triangular Microchannels[J]. International Journal of Multiphase Flow，2001，27(5)：765-782.
[29]Sun Baojiang，Wang Ruihe，Zhao Xinxin，et al. The Mechanism for the Formation of Slug Flow in Vertical Gas-liquid Two-phase Flow[J]. Solid-State Electronics，2002，46 (12)：2323-2329.
[30]Kim N H，Sin T R. Two-phase Flow Distribution of Air-water Annular Flow in a Parallel Flow Heat Exchanger[J]. International Journal of Multiphase Flow，2006，32(12)：1340-1353.
[31]Li F C，Kunugi T，Serizawa A. MHD Effect on Flow Structures and Heat Transfer Characteristics of Liquid Metal-gas Annular Flow in a Vertical Pipe[J]. International Journal of Heat and Mass Transfer，2005，48(12)：2571-2581.
[32]Qian D Y，Lawal A. Numerical Study on Gas and Liquid Slugs for Taylor Flow in a T-junction Microchannel[J]. Chemical Engineering Science，2006，61(23)：7609-7625.
[33]Saisorn S，Wongwises S. A Review of Two-phase Gas-liquid Adiabatic Flow Characteristics in Micro-channels[J]. Renewable and Sustainable Energy Reviews，2008，12(3)：824-838.
[34]Pohorecki R，Kula K. A Simple Mechanism of Bubble and Slug Formation in Taylor Flow in Microchannels[J]. Chemical Engineering Research and Design，2008，86(9)：997-1001.
[35]Gupta R，Fletcher D F，Haynes B S. On the CFD Modeling of Taylor Flow in Microchannels[J]. Chemical Engineering Science，2009，64(12)：2941-2950.
[36]Chu J C，Teng J T，Greif R. Experimental and Numerical Study on the Flow Characteristics in Curved Rectangular Microchannels[J]. Applied Thermal Engineering，2010，30(13)：1558-1566.
[37]Zhang W，Hibiki T，Mishima K. Correlations of Two-phase Frictional Pressure Drop and Void Fraction in Mini-channel[J]. International Journal of Heat and Mass Transfer，2010，53(1/3)：453-465.