Development of an Experimental Platform for Linear Motors in CNC Machine Tools

China Mechanical Engineering ›› 2012, Vol. 23 ›› Issue (3): 274-278.

Previous Articles Next Articles

Development of an Experimental Platform for Linear Motors in CNC Machine Tools

Wang Mulan1,2;Zhang Chongwei1;Lin Jian2;Pan Chao3

1.Hefei University of Technology, Hefei, 230009

2.Jiangsu Key Laboratory of Advanced Numerical Control Technology, Nanjing Institute of Technology, Nanjing,211167

3.Jiangsu University, Zhenjiang, Jiangsu,212013

Online:2012-02-10 Published:2012-02-15
Supported by:

Jiangsu Provincial Natural Science Foundation of China（No. BK2008367）;

Jiangsu Provincial Natural Science Basic Research Program of Higher Education of China（No. 08KJB460003）

数控机床用直线电机伺服试验平台开发及应用

汪木兰1,2;张崇巍1;林健2;潘超3

1.合肥工业大学,合肥,230009

2.南京工程学院先进数控技术江苏省高校重点建设实验室,南京,211167

3.江苏大学,镇江,212013

基金资助:
江苏省自然科学基金资助项目(BK2008367)；江苏省“六大人才高峰”高层次人才项目(2008163)；先进数控技术江苏省高校重点建设实验室开放基金资助项目(KXJ07122，KXJ07123)；江苏省高校自然科学基础研究项目(08KJB460003)
Jiangsu Provincial Natural Science Foundation of China（No. BK2008367）;

Jiangsu Provincial Natural Science Basic Research Program of Higher Education of China（No. 08KJB460003）

Abstract

Abstract:

On the basis of the dynamic characteristics analysis of linear servo systems,the advanced control strategies were put forward to restrain disturbance,improve static and dynamic performance,and achieve strong robustness. An integrated experimental platform for linear motor drive unit of CNC servo system was developed,including the corresponding debugging software. Finally,some notable technical problems were also cited in the use of linear motor in CNC machine tools.

Key words: linear motor, CNC machine tool, servo system, experimental platform

摘要：

在分析数控机床用直线电机驱动伺服系统动态特性的基础上,概括了直线伺服系统抑制外部扰动、提高稳态精度、提高动态响应速率以及增强鲁棒性的先进控制策略,研制了数控机床用直线电机驱动伺服系统综合试验平台及其调试软件,最后,指出了直线电机在使用过程中其他一些值得关注的技术问题。

关键词:

直线电机, 数控机床, 伺服系统, 试验平台

CLC Number:

TM359.4

HONG Mu-Lan-1, 2, ZHANG Chong-Wei-1, LIN Jian-2, BO Chao-3.

Development of an Experimental Platform for Linear Motors in CNC Machine Tools

[J]. China Mechanical Engineering, 2012, 23(3): 274-278.

汪木兰1, 2, 张崇巍1, 林健2, 潘超3.

数控机床用直线电机伺服试验平台开发及应用

[J]. 中国机械工程, 2012, 23(3): 274-278.

[1]	TUN Jian, Jocher Dietrich, LI Jiang. Research on Sheet Metal Digital Incremental Forming Technology without Support [J]. J4, 201016, 21(16): 2002-2005,2015.
[2]	DAI Xin, LIU Huanlao, WANG Yulin, LI Xiang. A Key Geometric Error Identification Method for CNC Machine Tools Based on Machining Trajectory Sensitivity Indicators [J]. China Mechanical Engineering, 2025, 36(12): 2862-2869.
[3]	Qiong WEI, Linyong BAI, Zichao CHEN, Daode ZHANG, Yi LI. Sliding Mode Control for Pneumatic Swing Angle Servo Systems Based on Disturbance Observation and Friction Compensation [J]. China Mechanical Engineering, 2025, 36(11): 2563-2573.
[4]	Shijie SU, Yongqin CHENG, Yi HU, Jianhui HE, Shuji YANG. Coordination Control of Dual-valve Electrohydraulic Servo Systems Based on Integration of Reinforcement Learning and Adaptive Robust Control [J]. China Mechanical Engineering, 2025, 36(10): 2335-2342.
[5]	Haitao LI, Shulei XU, Yawen WANG, Xiaobin BAI, Xiaoning JING. Research on Calibration Principle and Method of Laser Tracker Base Stations Based on External Physical Standard [J]. China Mechanical Engineering, 2025, 36(08): 1875-1882.
[6]	TIAN Hailong1, 2, SUN Yuzhi1, 2, YANG Zhaojun1, 2, LIU Zhifeng1, 2, CHEN Chuanhai1, 2, HE Jialong1, 2. Research Status and Development Trends of Failure Modes, Effects, and Criticality Analysis for CNC Machine Tool Reliability [J]. China Mechanical Engineering, 2025, 36(07): 1430-1441.
[7]	ZHANG Dijia1, 2, GAO Luping2, ZHOU Shaoliang2, GAO Longlong2, LI Baoren2. Robust Control of High-pressure Pneumatic Pressure Servo Systems [J]. China Mechanical Engineering, 2024, 35(07): 1141-1150.
[8]	LI Jian, MU Zongyi, DU Yanbin, HUANG Guangquan, RAN Yan. Research on Availability Analysis Method of CNC Machine Tools Based on Meta-action [J]. China Mechanical Engineering, 2023, 34(15): 1848-1855.
[9]	LI Zhenjun, ZHAO Chunyu. Thermal Mechanics Coupling Analysis of Angular Contact Ball Bearings Installed in Pairs in Feed System [J]. China Mechanical Engineering, 2023, 34(07): 821-829.
[10]	LI Dongyang, YUAN Dongfeng, ZHANG Haixia, ZHENG Anzhu, DI Zijun, LIANG Daojun, . Research on Intelligent Tool Fault Diagnosis System of Machine Tools with Cloud-Edge-Device Collaboration [J]. China Mechanical Engineering, 2023, 34(05): 584-594.
[11]	CHEN Hao, GONG Mingde, ZHAO Dingxuan, ZHANG Wei, ZHANG Yue, HAO Chunyou, . Sensitivity Analysis and Adaptive Tracking Control of Electro-hydraulic Active Suspensions [J]. China Mechanical Engineering, 2023, 34(04): 481-489.
[12]	JIANG Xuemei, YUAN Zihang, LOU Ping, ZHANG Xiaomei, YAN Junwei, HU Jiwei, . A Collision Detection Method of Heavy-duty CNC Machine Tools Based on Digital Twin [J]. China Mechanical Engineering, 2022, 33(22): 2647-2654，2663.
[13]	DONG Zhenle, YANG Yinghao, YAO Jianyong, ZHANG Zheng, LI Geqiang, WANG Shuai. Asymptotic Prescribed Performance Tracking Control of Electro-hydraulic Servo Systems under Matched and Unmatched Disturbances [J]. China Mechanical Engineering, 2022, 33(20): 2437-2443.
[14]	LU Chengwei, QIAN Bozeng, WANG Huimin, XIANG Sitong. Key Geometric Error Analysis and Compensation Method of Five-axis CNC Machine Tools under Workpiece Feature Decomposition [J]. China Mechanical Engineering, 2022, 33(14): 1646-1653.
[15]	SHI Difen, HOU Runmin, GU Xiaohui, HOU Yuanlong. Novel NFTSM Control for Servo Systems [J]. China Mechanical Engineering, 2022, 33(04): 413-420.

Development of an Experimental Platform for Linear Motors in CNC Machine Tools

数控机床用直线电机伺服试验平台开发及应用

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics