Research on Gear's Contacting Fatigue Life Prediction of Side Reducer in Armored Vehicle

Abstract

Abstract:

By dealing with the load data from vehicle test on typical terrain, this paper obtains the torque and stress spectrum bearing by the side reducer gear in armored vehicle. Considering the influence of the residual stress on the contacting fatigue limit, the distribution of strength and contacting fatigue limits in different depths were obtained by means of the distribution of residual stress and hardness as well as the relationship between strength and hardness. The gear's fatigue life was predicted by combining the fatigue life prediction technique.The prediction result is accorded with the actual rule.

Key words: , side reducer, , gear, , contact fatigue, , life span prediction

摘要：

通过对根据典型路面实车试验获得的载荷数据进行雨流计数处理，编制了装甲车辆侧减速器齿轮所承受的扭矩谱和应力谱;充分考虑残余应力对齿轮接触疲劳极限的影响，通过强度和硬度之间的转换关系以及疲劳强度与残余应力的作用关系，得到了齿面沿深度方向的静强度以及接触疲劳强度分布;结合疲劳寿命分析技术，进行了齿轮疲劳寿命预测，其预测结果与实际规律相符合。

关键词:

侧减速器, 齿轮, 接触疲劳, 寿命预测



CLC Number:

TJ811

TANG Dong-Gong, CUI Yu-Lian, ZHANG Bing-Chi, DIAO Yong-Dong.

Research on Gear's Contacting Fatigue Life Prediction of Side Reducer in Armored Vehicle

[J]. China Mechanical Engineering, 2011, 22(22): 2762-2765.

唐东红, 崔玉莲, 张炳喜, 赵永东.

装甲车辆侧减速器齿轮接触疲劳寿命预测研究

[J]. 中国机械工程, 2011, 22(22): 2762-2765.

[1]	CHEN Li-Feng, TUN Xiao-Ling, QIN Da-Tong, XIAO Zheng-Meng. Study on Frictional Power Losses of Spur Gear [J]. J4, 201016, 21(16): 1911-1915.
[2]	WANG Rong, LI Junjie, ZHENG Wenge, WANG Jia, HE Mingrong. Gear Fatigue Damage Prediction with Coupling Effect of Environmental Randomness and Load Sequence [J]. China Mechanical Engineering, 2026, 37(1): 105-113.
[3]	ZHANG Xu, LI Congbo, ZHANG You, ZHANG Chenghui, ZHOU Feng. Geometric Parameter Optimization Method of Honing Wheels for Lower-noise Texture [J]. China Mechanical Engineering, 2025, 36(12): 2875-2884.
[4]	Shuai MO, Xuan HUANG, Wenbin LIU, Wei ZHANG. Nonlinear Dynamics of Continuously Tunable Planetary Gear Metamaterial [J]. China Mechanical Engineering, 2025, 36(11): 2509-2516.
[5]	Chenfan JIA, Huaiju LIU, Caichao ZHU, Taimin CHEN, Jinxiao CHEN. An Aviation Gear Bulk Temperature Prediction Method and Verification Research Based on CatBoost [J]. China Mechanical Engineering, 2025, 36(08): 1658-1667.
[6]	Jinzhan SU, Yaoke FENG, Bin LIU, Xinlong CAO, Linlin SUN. Analysis and Optimization of Meshing Performance of Straight Bevel Gears Machined by Dual Interlocking Circular Cutters [J]. China Mechanical Engineering, 2025, 36(08): 1683-1690.
[7]	ZHENG Chao, LIU Jianchao, WU JunXUE Xin. Vibration Reduction Analysis of All-metal Multi-directional Isolation Devices [J]. China Mechanical Engineering, 2025, 36(07): 1463-1470.
[8]	HUANG Hao1, WANG Zeng2, LI Bo2, LU Zehua1, LIU Huaiju1. Structure-thermal Compliance Collaborative Topology Optimization of Aero-engine Gears Transmission Case Based on Compromise Programming Method [J]. China Mechanical Engineering, 2025, 36(07): 1471-1478.
[9]	ZHAO Tingqi1, CHENG Hongyu2, SUN Maokai1, WANG Shenghai1, WANG Haoran1, CHEN Haiquan1. Nonlinear Stability Control of Multi-cable Anti-sway Systems for Marine Cranes [J]. China Mechanical Engineering, 2025, 36(07): 1487-1496.
[10]	ZHANG Jianyu, WANG Liuzhen, XIAO Yong, MA Yanan. Fusion of Degradation Feature Information and Remaining Life Prediction for Rolling Bearings [J]. China Mechanical Engineering, 2025, 36(07): 1553-1561.
[11]	. Geometric Feature Modeling and Assembly Interference Detection Method for Large Ship Components [J]. China Mechanical Engineering, 2025, 36(07): 1636-1649.
[12]	WANG Zhichao1, LIU Chao1, RAN Yan2, CHEN Yifan3, JIANG Dongxiang1, ZHANG Genbao2, 3. A Reliability Allocation Method Considering Distribution and Transmission Models for Mechanical Systems [J]. China Mechanical Engineering, 2025, 36(06): 1143-1150.
[13]	LIU Wei1, 2, CHANG Jiaqi1, 2, LI Boxin1, 2, YAN Can1, 2, DENG Zhaohui3, WAN Linlin1, 2. Influences of MCMBs on Electrolytic Dressing and Grinding Performances of Multi-layer Brazed Diamond Grinding Wheels [J]. China Mechanical Engineering, 2025, 36(06): 1151-1158.
[14]	GAO Guanbin1, 2, ZHAO Siguo1, 2, LI Yingjie1, 2. Modeling and Identification of Robot End-payloads Based on Joint Torque Balance [J]. China Mechanical Engineering, 2025, 36(06): 1188-1197.
[15]	LIN Shuwen, LU Zhe, WEI Shijia, CHEN Jianxiong, GU Tianqi, XIE Yu. Simulation of Dynamic Characteristics of Excavator Working Processes and Multi-objective Optimization Design Method of Main Component Parameters [J]. China Mechanical Engineering, 2025, 36(06): 1371-1379.