Design of Constant-force-elastic Mechanism

Abstract

Abstract:

The paper put forward a kind of mechanism which can output constant-force.The principal of the mechanism was that by designing the profile of the parts, the directions of normals in contact points can be controlled,which made the function relationship between the displacement and the direction of force passed via parts desirable,thus the function relationship between the displacement and the force output met the demands.Further, through an example and the related experiments,the mechanism and the design method were proved to be feasible and effective.

Key words:

constant force, elasticity, spring, damp

摘要：

设计了一种能输出恒力的机构,该机构设计原理是：通过设计传力构件廓形,控制构件接触点法向,使机构内部力的传递方向与位移之间呈一定的函数关系,从而达到机构的输出力与位移之间呈所需函数关系的目的。最后通过设计实例和实验,证明了所提出机构原理和设计方法有效可行。

关键词:

恒力, 弹性, 弹簧, 阻尼

CLC Number:

TH122

CHEN Jian, DENG Li-Juan.

Design of Constant-force-elastic Mechanism

[J]. China Mechanical Engineering, 2010, 21(16): 1944-1946.

陈建, 邓利娟.

恒力弹性机构的设计

[J]. 中国机械工程, 2010, 21(16): 1944-1946.

[1]	CHEN Jian, DENG Li-Juan. Design of Constant-force-elastic Mechanism [J]. J4, 201016, 21(16): 1944-1946.
[2]	SHANG Ze-Jin, WANG Zhong-Min. Bifurcation and Chaos of Forced Vibration for a Shape Memory Alloy Spring Oscillator  [J]. J4, 201016, 21(16): 1986-1991.
[3]	XIA Liangliang1, XU Yong2, LI Jie3, XIE Wenlong2, LIU Xuefei3, ZHANG Shihong2. Study on Formability Enhancements and Springback Reduction Effects of Aluminum Alloys under High Strain Rate [J]. China Mechanical Engineering, 2024, 35(12): 2177-2184.
[4]	SUN Feng1, ZHU Anjie1, ZHANG Ming1, PEI Wenzhe1, JIN Junjie1, ZHANG Weiwei2, TANG Junyue2, JIANG Shengyuan2. Design and Tests of Lunar Spring-recovery Rope-driven Sampling Robot Arm [J]. China Mechanical Engineering, 2024, 35(11): 1977-1985.
[5]	XING Gang1, HAN Fei1, HUANG Hongjiang2. Mechanism Study of Shapings Influences on Accuracy of Roll Forming Products [J]. China Mechanical Engineering, 2024, 35(10): 1862-1870.
[6]	WU Hui, LI Xiaogao, SHEN Guolang, WANG Xinguo, MA Chenwen. Interface Quality Detection of Double-layer Bonding Structures Based on Ultrasonic Guided Wave Technology [J]. China Mechanical Engineering, 2024, 35(05): 916-927.
[7]	WANG Zhiqiang, LEI Zhenyu. Analysis of Causes for Rail Corrugation on Steel Spring Floating Slab Tracks of Metro Small Radius Curves [J]. China Mechanical Engineering, 2023, 34(24): 2899-2908.
[8]	WANG Kaidi, CHEN Suifan, TANG Wei, QIN Kecheng, LI Qipeng, YANG Zhan, LIU Yang, ZOU Jun. A Bionic Bouncing Robot Design and Made Inspired by Locusts [J]. China Mechanical Engineering, 2023, 34(24): 2946-2951.
[9]	GAO Song, SUN Yingli, LI Qihan, YING Liang, HAO Zhaopeng, ZHANG Bangcheng. Multi-point 3D Hot Stretch-Bending Process of Titanium Alloy Profiles and Their Microstructure Evolution [J]. China Mechanical Engineering, 2023, 34(24): 2986-2995,3014.
[10]	HAN Fei, SUN Weilong, ZHANG Ruoqing. Study on the Influences of Bending Methods on Springback in Roll Forming Processes [J]. China Mechanical Engineering, 2023, 34(19): 2353-2361.
[11]	NIE Xin, TAN Tian, SHEN Danfeng. Research on Stamping Springback of Automobile Beam Parts Based on Deep Learning [J]. China Mechanical Engineering, 2023, 34(07): 838-846.
[12]	CHEN Xin, LIU Jiangnan, LONG Wangpeng, LYU Jianwen. Modelling and Analysis of Multiple-cross-springs Flexure Pivots with Arc Curved Beams [J]. China Mechanical Engineering, 2023, 34(03): 269-276，286.
[13]	ZHU An, AI Haiping, CHEN Li. Compliance Control of Dual-arm Space Robot Capture Satellite Based on Barrier Lyapunov Functions [J]. China Mechanical Engineering, 2022, 33(24): 2997-3006.
[14]	YANG Zhuoyun, FAN Bocheng, LI Xiaoyi, ZHANG Zilu, DONG Guojiang, . Recession of Elastic Modulus and Prediction of Springback for 7075 Aluminum Alloy Sheets [J]. China Mechanical Engineering, 2022, 33(18): 2241-2248.
[15]	QU Cong, MENG Zhijuan, ZHAO Liang, CHEN Yao, MA Lidong. Prediction of Five-point Bending Springback of Ti-6Al-4V Plates Based on Variable Elastic Modulus [J]. China Mechanical Engineering, 2022, 33(16): 1991-1999.