ZHANG Xinyan, WANG Ying, HU Pengke, WANG Rui, SHU Xuedao. Design and Experiments of Rotary-cutting Forming Devices for Tapered End Blanks[J]. China Mechanical Engineering, 2021, 32(17): 2100-2107.
[1]胡正寰, 杨翠苹, 王宝雨. 我国轴类零件轧制技术进展[J]. 机械工程学报, 2012, 48(18):7-12.
HU Zhenghuan, YANG Cuiping, WANG Baoyu. Development of Part Rolling Technology in China[J]. Journal of Mechanical Engineering, 2012, 48(18):7-12.
[2]YANG Cuiping, ZHENG Zhenhua, HU Zhenghuan. Simulation and Experimental Study on the Concavity of Workpiece Formed by CWR without Stub Bar[J]. The International Journal of Advanced Manufacturing Technology, 2018, 95(1/4):707-717.
[3]PATER Z, TOMCZAK J, BULZAK T. New Forming Possibilities in Cross Wedge Rolling Processes [J]. Archives of Civil and Mechanical Engineering, 2018, 18(1):149-161.
[4]束学道, 程超, 龚文炜, 等. 挤压式楔横轧小料头轧制的微观组织演变分析[J]. 中国机械工程, 2013, 24(15):2109-2113.
SHU Xuedao, CHENG Chao, GONG Wenwei, et al. Analysis of Microstructure Evolution of Extruded Cross Wedge Rolling for Small Remnant Rolling[J]. China Mechanical Engineering, 2013, 24(15):2109-2113.
[5]PATER Z. Cross-wedge Rolling of Shafts with an Eccentric Step[J]. Journal of Iron and Steel Research, International, 2011, 18(6):26-30.
[6]刘文科, 张康生, 杨光, 等. 小断面收缩率楔横轧件的变形规律[J]. 工程科学学报, 2015, 37(6):777-781.
LIU Wenke, ZHANG Kangsheng, YANG Guang, et al. Deformation Rule of Light Area Reduction Shafts by Cross Wedge Rolling[J]. Chinese Journal of Engineering, 2015, 37(6):777-781.
[7]ZENG Jian, XU Chunguo, Ren Weiwei, et al. Study on the Deformation Mechanism for Forming Shafts without Concavity during the Near-net Forming Cross Wedge Rolling Process[J]. The International Journal of Advanced Manufacturing Technology, 2017, 91(1/4):127-136.
[8]BULZAK T, JANYSZ T, PATER Z, et al. A Comparative Study of Helical and Cross-wedge Rolling Processes for Producing Ball Studs [J]. Materials, 2019, 12(18):2887.
[9]张晓英. 无端头凹心楔横轧件精确成形机理数值模拟[J]. 锻压技术, 2013, 38(2):156-159.
ZHANG Xiaoying. Simulation of Deformation Principle of Near Net Shape Cross Wedge Rolling Process to Form Shafts without Concaves[J]. Forging & Stamping Technology, 2013, 38(2):156-159.
[10]曾健, 徐春国, 任伟伟, 等. 不同端部形状下工艺参数对楔横轧轧件凹心深度的影响[J]. 塑性工程学报, 2017, 24(2):111-117.
ZENG Jian, XU Chunguo, REN Weiwei, et al. The Influence of Process Parameters on the Depth of Concave Core of Cross Wedge Rolling under Different End Shapes[J]. Journal of Plasticity Engineering, 2017, 24(2):111-117.
[11]束学道, 韩素涛, 位杰. 轴端长度对楔横轧阶梯轴成形光轴端面质量的影响[J]. 工程科学与技术, 2018, 50(2):177-183.
SHU Xuedao, HAN Sutao, WEI Jie. Effects of Shaft-end Length on the Quality of Equal Diameter Shaft Formed with Cross Wedge Rolling from the Stepped Shaft [J]. Chinese Journal of Engineering, 2018, 50(2):177-183.
[12]柳传, 束学道, 胡斌. 楔横轧辊剪制坯力的研究[J]. 热加工工艺, 2015, 44(11):128-131.
LIU Chuan, SHU Xuedao, HU Bin. Research on Roll-cutting Blank Force of Cross Wedge Rolling[J]. Hot Working Technology, 2015, 44(11):128-131.
[13]WEI J L, SHU X D, TIAN D Y, et al. Study in Shaft End Forming Quality of Closed-open CWR Shaft Using a Wedge Block[J]. The International Journal of Advanced Manufacturing Technology, 2017, 93(1/4):1095-1105.
[14]WEI Y L, SHU X D, HAN S T, et al. Analysis of Microstructure Evolution during Different Stages of Closed-open CWR[J]. The International Journal of Advanced Manufacturing Technology, 2018, 95(5/8):1975-1988.
[15]WANG Y, WANG R, ZHANG X H, et al. Study on Manufacturing of Special-shaped Ends Blank for Cross Wedge Rolling without Stub Bar[J]. The International Journal of Advanced Manufacturing Technology, 2020, 109:9-12.
[16]WANG R, WANG Y, et al. Study on Roll-cutting Forming Method of Conical End Blank for Cross Wedge Rolling(CWR)without Stub Bar[J]. Metalurgija, 2020, 59(1):18-22.
[17]束学道, 韩素涛, 位杰. 闭开联合楔横轧光轴轧件工艺参数对力能参数的影响[J]. 中南大学学报(自然科学版), 2018, 49(7):1667-1676.
SHU Xuedao, HAN Sutao, WEI Jie. Influence of Billet Parameters on Force and Energy Parameters of Closed-open Cross Wedge Rolling Forming Equal Diameter Shaft [J]. Journal of Central South University(Natural Science Edition), 2018, 49(7):1667-1676.
[18]PATER Z, TOMCZAK J, BULZAK T, et al. Determination of the Critical Value of Damage in Achannel-die Rotational Compression Test [J]. International Journal of Material Forming, 2020, 13(22):993-1002.
[19]闫华军, 张超, 路红岩, 等. 工艺参数对楔横轧大断面多台阶轴拉细缩颈的影响[J]. 塑性工程学报, 2020, 27(9):100-107.
YAN Huajun, ZHANG Chao, LU Hongyan, et al. Effect of Process Parameters on Thinning and Necking of Largesection Multi-step Shaft in Cross Wedge Rolling[J]. Journal of Plasticity Engineering, 2020, 27(9):100-107.
[20]操龙飞, 徐光, 邓鹏, 等. 钢的热膨胀特性研究[J]. 北京科技大学学报, 2014, 36(5):639-643.
CAO Longfei, XU Guang, DENG Peng, et al. Study on Thermal Expansion Properties of Steels[J]. Journal of University Science and Technology Beijing, 2014, 36(5):639-643.
[21]刘振宇, 李志峰. 新一代热轧板带材表面氧化铁皮控制技术的现状与进展[J]. 轧钢, 2020, 37(1):1-6.
LIU Zhenyu, LI Zhifeng. State of the Art Development on Technology for New Generation to Controlling Oxide Scale of Hot Rolled Plate and Strip[J]. Steel Rolling, 2020, 37(1):1-6.