焊枪头与钣金件空间间隙的自动检查

doi:10.3969/j.issn.1004-132X.2021.21.009

摘要/Abstract

摘要： 针对车身三维模型中焊枪头与焊点附近的钣金件之间空间间隙检查过程复杂、检查结果不准确等问题，提出了焊枪头与钣金件空间间隙的自动检查方法。在特征识别算法和包围盒技术的基础上获得焊点特征、钣金件特征和螺母特征等分析要素；基于三维模型的投影算法和距离测量算法计算钣金件的拓扑面与虚拟焊枪之间的距离，与安全阈值比较，筛选出与焊枪发生干涉的危险平面、孔和螺母；对焊接空间不足的焊点进行标注并截图。利用二次开发环境所提供的函数库编程实现了上述算法，通过运行实例以及企业的实际使用，验证了自动检查系统的可行性。

关键词: 焊枪, 钣金件, 焊点, 空间间隙

Abstract: In order to solve the problems such as complicated inspection processes and inaccurate inspection results of space clearances of welding gun head and sheet metal parts near welding spot in 3D model of car body, an automatic inspection method for space clearances of welding gun head and sheet metal parts was proposed. Based on the feature recognition algorithm and bounding box technology, the analysis elements such as welding spot features, sheet metal features and nut features were obtained. Based on the projection algorithm and distance measurement algorithm of 3D model, the distance between topological surface of sheet metal parts and virtual welding gun was calculated. After compared with safety threshold, dangerous planes, holes and nuts that interfered with welding gun were screened out. The welding spots with insufficient welding space were marked and taken screenshot. The above algorithm was realized by using the function library provided by the secondary development environment. The feasibility of the automatic inspection system was verified by running examples and the actual uses of enterprises.

Key words: welding gun, sheet metal parts, welding spot, space clearance

中图分类号:

TP391.7

董玉德, 吴文哲, 陈健, 吴海江, 邹文俊. 焊枪头与钣金件空间间隙的自动检查[J]. 中国机械工程, 2021, 32(21): 2598-2605.

DONG Yude, WU Wenzhe, CHEN Jian, WU Haijiang, ZOU Wenjun. Automatic Inspection of Space Clearances between Welding Gun Head and Sheet Metal Parts[J]. China Mechanical Engineering, 2021, 32(21): 2598-2605.

参考文献

［1］刘红军，莫蓉，范庆明，等.并行工程下基于特征的零件可制造性研究［J］.中国机械工程，2006，17(8):805-808.
LIU Hongjun, MO Rong, Fan Qingming, et al. Research on Evaluation Approach of Feature-based Part Manufacturability under Concurrent Engineering Environment［J］. China Mechanical Engineering, 2006,17(8):805-808.
［2］许加陈，游有鹏. 基于IGES的钣金零件特征识别的方法研究［J］.机电工程，2017，34(6):582-585.
XU Jiachen, YOU Youpeng. Feature Recognition Method of Sheet-metal Based on IGES［J］. Journal of Mechanical & Electrical Engineering, 2017,34(6):582-585.
［3］GHADAI S, BALU A, SARKAR S, et al. Learning Localized Features in 3D CAD Models for Manufacturability Analysis of Drilled Holes［J］. Computer Aided Geometric Design, 2018,62(5):263-275.
［4］徐同明，陈卓宁，李建勋. 面向三维机加工艺规划系统的CATIA模型B-Rep信息提取与应用［J］.计算机系统应用，2014，23(6):211-214.
XU Tongming, CHEN Zhuoning, LI Jianxun. Extraction and Application of CATIA Model B-rep Information Oriented to Three-dimensional Machining Process Planning System［J］. Computer Systems & Applications, 2014,23(6):211-214.
［5］马善坤，刘长安，方文涛. 基于加工特征的B-Rep模型几何变换算法［J］.组合机床与自动化加工技术，2012(4):20-24.
MA Shankun, LIU Changan, FANG Wentao. Geometric Updating Method for B-Rep Model Based on Machining Features［J］. Modular Machine Tool & Automatic Manufacturing Technique, 2012(4):20-24.
［6］顾翠，王红雨，王江，等.基于宇航复杂结构产品可制造性分析的特征信息提取与分类［J］.机械设计与制造工程，2014，43(2):18-22.
GU Cui, WANG Hongyu, WANG Jiang, et al. Extraction and Classification of the Feature Information Based on Manufacturability Analysis of Aerospace Complex Structured Products［J］. Machine Design and Manufacturing Engineering, 2014,43(2):18-22.
［7］滕汝英，刘红军，郝博，等. 基于CAA航空结构件特征信息的自动识别［J］.沈阳航空航天大学学报，2015，32(5):59-62.
TENG Ruying, LIU Hongjun, HAO Bo, et al. Automatic Recognition of Aircraft Structure Feature Information Based on CAA［J］.Journal of Shenyang Aerospace University, 2015,32(5):59-62.
［8］李巧敏，柳玉起，章志兵，等.基于CATIA的汽车覆盖件成形模拟后处理系统［J］.中国机械工程，2015，26(6):831-836.
LI Qiaomin, LIU Yuqi, ZHANG Zhibing, et al. Post-processing System in Automobile Panel Forming Simulation Based on CATIA［J］. China Mechanical Engineering,2015,26(6):831-836.
［9］韦文龙，仲梁维，陈彩凤.基于二次开发的动态干涉检查系统设计与应用［J］.软件导刊，2018，17(4):144-147.
WEI Wenlong, ZHONG Liangwei, CHEN Caifeng. Design and Application of Dynamic Interfarence Checking System Based on Secondary Development［J］. Software Guide, 2018,17(4):144-147.
［10］QUINLAN S. Efficient Distance Computation between Non-convex Objects［C］∥ Proceedings of the 1994 IEEE International Conference on Robotics and Automation. San Diego, 1994:3324-3329.
［11］TESCHNER M, HEIDELBERGER B, MLLER M, et al. Optimized Spatial Hashing for Collision Detection of Deformable Objects［C］∥8th Workshop on Vision, Modeling, and Visualization. Munich，2003:47-54.
［12］冉启洪，汤艳刚，齐瑞霞，等.白车身焊装过程尺寸控制及数据分析方法研究［J］.企业科技与发展，2018(1):68-70.
RAN Qihong, TANG Yangang, QI Ruixia, et al. Study on Dimensional Control and Data Analysis Methods for White Body Welding Process［J］. Sci-Tech & Development of Enterprise, 2018(1):68-70.
［13］刘福，董玉德，王亮，等. 钣金件中匹配孔的半径差及轴线重合度自动检查［J］.图学学报，2019，40(4):792-794.
LIU Fu, DONG Yude, WANG Liang, et al. Automatic Inspection of the Radius Difference and Axis Coincidence of Matching Holes in Sheet Metal Parts ［J］. Journal of Graphics, 2019,40 (4):792-794.
［14］胡毕富，吴约旺. CATIA软件建模与CAA二次开发［M］. 北京:北京航空航天大学出版社，2018.
HU Bifu, WU Yuewang. CATIA Software Modeling and CAA Secondary Development［M］. Beijing:Beijing University of Aeronautics and Astronautics Press, 2018.

[1]	宋凯, 苏玉龙, 杜展鹏, 陈少伟. 钢板点焊翘曲缺陷对平均应力强度因子的影响[J]. 中国机械工程, 2021, 32(05): 505-.
[2]	胡金花1;宋凯2;熊礼明3. 考虑修正平均等效应力强度因子的焊点缺陷疲劳寿命研究[J]. 中国机械工程, 2020, 31(06): 740-745.
[3]	聂昕;陈焕焕. 热成形钢板与双相钢板焊点失效模式研究[J]. 中国机械工程, 2019, 30(21): 2636-2642.
[4]	胡朝辉;崔雪姣;成艾国;秦晓凯. 基于均匀化循环理论的车身焊点布局优化方法[J]. 中国机械工程, 2018, 29(19): 2384-2388.
[5]	何智成1;汲彦军1;成艾国1;何道聪2. 超声波检测焊点质量的建模方法及应用分析[J]. 中国机械工程, 2018, 29(03): 359-365.
[6]	王晓光1;宇慧平2;李晓阳2;陈树君2. 22MnB5钢焊点的力学试验[J]. 中国机械工程, 2017, 28(19): 2383-2387.
[7]	聂昕, 郭志福, 何智成. 基于时频特征的汽车点焊质量自动化超声评价[J]. 中国机械工程, 2016, 27(08): 1102-1106.
[8]	刘志成, 姜潮, 李源, 白影春. 考虑焊点不确定性的车身点焊结构疲劳寿命优化[J]. 中国机械工程, 2015, 26(18): 2544-2549.
[9]	余德忠, 徐向纮. 钣金件多工位装配尺寸误差建模分析与仿真[J]. 中国机械工程, 2013, 24(17): 2331-2336.
[10]	杨洪刚. 管板单面电阻点焊弹塑性变形分解 [J]. 中国机械工程, 2011, 22(5): 608-610.
[11]	谢斌, 成艾国, 陈涛, 董立强. 基于汽车碰撞仿真的实体单元焊点模拟方法研究 [J]. 中国机械工程, 2011, 22(10): 1226-1231.
[12]	梁彩平, 田浩彬, 刘晓航. 电极力对差厚异质高强钢点焊质量的影响 [J]. 中国机械工程, 2010, 21(13): 1614-1617.
[13]	高延峰;;张;华;李志刚;肖建华;. 特征谐波法在焊枪姿态检测中的应用[J]. J4, 2009, 20(02): 0-251.